लो लोडर सेमिक्ट्रेलरFAYMONVILLE
MAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
लो लोडर सेमिक्ट्रेलर
FAYMONVILLE
MAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
स्थिति
उपयोग किया हुआ
स्थान
Essen 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
मूल्य और स्थान
- विक्रेता का स्थान:
- Heegstraße 6-8, 45356 Essen, जर्मनी

कॉल करें
तकनीकी विवरण
- अधिकतम भार वजन:
- 34,030 किग्रा
- कुल वजन:
- 48,000 किग्रा
- धुरा विन्यास:
- 3 धुरे
- प्रथम पंजीकरण:
- 07/2025
- अगला निरीक्षण (TÜV):
- 07/2026
- कुल चौड़ाई:
- 2,480 मिमी
- उपकरण:
- एबीएस
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A20429915
- संदर्भ संख्या:
- 35205
- अद्यतन:
- अंतिम बार 01.11.2025 को
विवरण
You can find our complete range of vehicles with immediately and shortly available units on our website.
Equipment highlights (full equipment details available on request):
Gooseneck
* Gooseneck with rear taper approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
Tsdpexttc Njfx Af Rjd
* Hardwood flooring approx. 30 mm thick
* Loading platform after the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 1 pair of fold-in lashing rings to the inside on the front centre beam (LC 10,000 daN)
* Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm area) above axles; tread plate covering
Two-piece steel ramps
* One pair of galvanized, reinforced two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating cover C40/5 (point load approx. 8 t on approx. 20 x 20 cm area)
* Ramp with hydraulically foldable ramp segments and hydraulic lifting gear, maximum load per pair: 40,000 kg
* According to Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position are not counted towards the vehicle length of 16,500 mm
Landing legs
* JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
* Tyres 235/75 R 17.5 3PMSF
* TPMS tyre pressure monitoring system according to ECE R 141
Axles
* BPW axles and suspension
* 2 rigid axles, 1 trailing axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with raising and lowering valve
Brake system
* WABCO brake system in compliance with EU regulations with EBS-E (2S2M)
Colors
* Trailer RAL 3002 carmine red
* Rims silver
* Tarp in RAL 9006 silver
Including accessories
* 1 spare wheel carrier under the loading platform, right-hand side
* 2-inch kingpin
* One galvanized steel front wall
* Yellow-red air couplings on the galvanized front connection strip
* 4 wheel chocks with holders on the front wall
* 3 height-adjustable wooden boards
* Galvanized folding supports under the rear taper of the loading platform
* Height-adjustable tarpaulin frame approx. 3,960 mm
* Galvanized front wall with tensioning system for the sliding curtains
* Height-adjustable roof by EDSCHA, adjustable by approx. 400 mm, shiftable to the front on aluminium roof beam profiles (bolted to front and rear wall)
* 3 pairs of movable stanchions in the loading area
* Structure hydraulically extendable at the rear by approx. 750 mm on both left and right
* Sliding curtain with approx. 700 mm length reserve, with tension straps at approx. 600 mm intervals in height
* Upper structure height approx. 3,960 mm (loaded)
* Driving with open sliding roof is not permitted and will result in tarp damage
* Anti-slip sand coating painted onto the tread plate at gooseneck and loading platform
* Cover plates to bridge the gap between ramps and loading platform
* Electro-hydraulic unit at the rear underneath the loading platform
* At the gooseneck and ramps left and right, each with holder for warning signs, including socket
* Operating valves for the ramps installed on the right-hand side of the trailer
* Grating cover in the gooseneck rear taper C30/3 (point load approx. 2 t on an area of 20 x 20 cm)
* Grating cover in the loading platform rear taper C4
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Equipment highlights (full equipment details available on request):
Gooseneck
* Gooseneck with rear taper approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
Tsdpexttc Njfx Af Rjd
* Hardwood flooring approx. 30 mm thick
* Loading platform after the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 1 pair of fold-in lashing rings to the inside on the front centre beam (LC 10,000 daN)
* Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm area) above axles; tread plate covering
Two-piece steel ramps
* One pair of galvanized, reinforced two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating cover C40/5 (point load approx. 8 t on approx. 20 x 20 cm area)
* Ramp with hydraulically foldable ramp segments and hydraulic lifting gear, maximum load per pair: 40,000 kg
* According to Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position are not counted towards the vehicle length of 16,500 mm
Landing legs
* JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
* Tyres 235/75 R 17.5 3PMSF
* TPMS tyre pressure monitoring system according to ECE R 141
Axles
* BPW axles and suspension
* 2 rigid axles, 1 trailing axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with raising and lowering valve
Brake system
* WABCO brake system in compliance with EU regulations with EBS-E (2S2M)
Colors
* Trailer RAL 3002 carmine red
* Rims silver
* Tarp in RAL 9006 silver
Including accessories
* 1 spare wheel carrier under the loading platform, right-hand side
* 2-inch kingpin
* One galvanized steel front wall
* Yellow-red air couplings on the galvanized front connection strip
* 4 wheel chocks with holders on the front wall
* 3 height-adjustable wooden boards
* Galvanized folding supports under the rear taper of the loading platform
* Height-adjustable tarpaulin frame approx. 3,960 mm
* Galvanized front wall with tensioning system for the sliding curtains
* Height-adjustable roof by EDSCHA, adjustable by approx. 400 mm, shiftable to the front on aluminium roof beam profiles (bolted to front and rear wall)
* 3 pairs of movable stanchions in the loading area
* Structure hydraulically extendable at the rear by approx. 750 mm on both left and right
* Sliding curtain with approx. 700 mm length reserve, with tension straps at approx. 600 mm intervals in height
* Upper structure height approx. 3,960 mm (loaded)
* Driving with open sliding roof is not permitted and will result in tarp damage
* Anti-slip sand coating painted onto the tread plate at gooseneck and loading platform
* Cover plates to bridge the gap between ramps and loading platform
* Electro-hydraulic unit at the rear underneath the loading platform
* At the gooseneck and ramps left and right, each with holder for warning signs, including socket
* Operating valves for the ramps installed on the right-hand side of the trailer
* Grating cover in the gooseneck rear taper C30/3 (point load approx. 2 t on an area of 20 x 20 cm)
* Grating cover in the loading platform rear taper C4
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2003
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 201 8... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है






















