कम लोडर सेमीट्रेलर

FAYMONVILLE MAX100 Semi-Tieflader Hebebett

Excerpt from the furnishings. Full furnishings available upon request.

Gooseneck
Gooseneck with beveled corners at the front approx. 45° and a rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Loading area
Loading area behind the gooseneck can be raised and lowered hydraulically, length approx. 2,800 mm, with a rear bevel approx. 1,000 mm x 8°
* 6 pairs of lashing rings that fold outwards (LC 5,000 daN)
* 2 pairs of lashing rings that fold outwards (LC 10,000 daN)
* 1 pair of lashing rings that fold inwards on the front central beam (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
* Grating C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate decking over the axles

Two-part steel ramps
* One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating decking (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically extendable and retractable ramp sections
* Hydraulic lifting mechanism, hydraulically adjustable, maximum load per pair: approx. 40,000 kg

Axles
* BPW axles and suspension
* 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, activated via reverse gear and manually
* Air suspension with lifting and lowering valve
* Axle tool

Tires
* 235/75 R 17.5 3PMSF tires
Kjlhccjwbx Ensqljdk

Seatposts
* JOST seatposts (mechanical) with 2-speed transmission for a lifting capacity of approx. 24 t (approx. 50 t test load)

Braking system
* Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Paintwork
* First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc dust primer
* A high-quality two-component (2K) topcoat in a single color in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)

Steel construction
* Steel construction made of high-strength fine-grain steel
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa)

Electrical system
* Electrical system in accordance with EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098

Accessories included
* 2-inch kingpin
* One galvanized steel bulkhead, approx. 400 mm high
* One spare tire holder in front of the bulkhead
* Yellow-red air couplings on the galvanized connecting strip at the front
* 4 wheel chocks with brackets on the bulkhead
* Galvanized folding supports under the sloped loading area
* A bracket for a rotating beacon at the rear of the trailer
* Grating in the sloped gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* Grating in the sloped loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Cover plates for bridging the Clearance between ramps and loading area
* A sand coating is applied to the checkered plates, above the kingpin, and on the loading area to prevent slipping.
* Yellow reflective tape in accordance with EU regulations on the sides and rear of the trailer.
* Electro-hydraulic unit located under the rear loading area.
* A bracket for the warning signs, including a power socket, is provided on the gooseneck and

विज्ञापन स्वचालित रूप से अनुवादित किया गया था। अनुवाद त्रुटियाँ संभव हैं।