पैकेजिंग मशीन

Becker BZ-2

Becker BZ-2 - Packaging System

- 2 identical, mirror-inverted packaging lines available
- without cutting machine
- Year of manufacture: 2020

The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine.

The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line.

Nsdpfjygipmox Amuolb
The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system.

Machine components (see schematic):

(1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor

Technical Data:

Packaging Dimensions (top closure):
- min. carton dimensions LxWxH: 500 x 120 x 100 mm
- max. carton dimensions LxWxH: 2250 x 420 x 320 mm
- max. product weight: 50 kg
Packaging Dimensions (side closure):
- min. carton dimensions LxWxH: 300 x 150 x 120 mm
- max. carton dimensions LxWxH: 1050 x 620 x 470 mm
- max. product weight: 50 kg
Installation:
- Operating voltage: 400 V / 50 Hz
- Rated current: 47 A
- Pre-fuse: 63 A
- Connected load: 32.5 kW
- Control voltage: 24 V
- Compressed air supply: 6 bar
- Air consumption: 10 l/min
- Sound pressure level: < 70 dB(A)
- Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm

इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।