मैंड्रेल ट्यूब झुकने वाली मशीनCesurbend
        PBNC-51    
 मैंड्रेल ट्यूब झुकने वाली मशीन
Cesurbend
        PBNC-51    
            स्थिति        
            नई                    
            स्थान        
                                                Mudersbach                                            

 तस्वीरें दिखाती हैं            
 मानचित्र दिखाएँ            
मशीन के बारे में जानकारी
मूल्य और स्थान
- स्थान:
 -             Stahlwerkstrasse 4, 57555 Mudersbach, DE                

 
 कॉल करें            
प्रस्ताव का विवरण
- विज्ञापन आईडी:
 - A20443230
 
- अद्यतन:
 - अंतिम बार 03.11.2025 को
 
विवरण
        Cesurbend Mandrel Tube Bending Machine PBNC-51
Technical Specifications
Max. Tube Diameter (mm): 51
Max. Tube Wall Thickness (mm): 3
Max. Bending Angle (°): 190
Tube Bending Rate (rpm): 7-10
Max. Hydraulic Pressure (bar): 200
Max. Bending Radius (mm): 250
Tube Length (mm): 3000
Bending Motor Power (kW): 5.5
Hydraulic Motor Power (kW): 3
Machine Width (mm): 1400
Machine Length (mm): 4215
Blodjxt Rc Tepfx Af Rep
Machine Height (mm): 1450
Machine Weight (kg): 1600
Features
• In this process, the clamp jaw secures the tube after it is inserted into the machine. The tube is bent over the die with half its diameter. When using both the mandrel and the wiper die during bending, superior results are achieved for high-quality bends, thin wall thicknesses, and minimal radii.
• This is a three-cylinder machine with a hydraulic spool located behind the hydraulic boom.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Technical Specifications
Max. Tube Diameter (mm): 51
Max. Tube Wall Thickness (mm): 3
Max. Bending Angle (°): 190
Tube Bending Rate (rpm): 7-10
Max. Hydraulic Pressure (bar): 200
Max. Bending Radius (mm): 250
Tube Length (mm): 3000
Bending Motor Power (kW): 5.5
Hydraulic Motor Power (kW): 3
Machine Width (mm): 1400
Machine Length (mm): 4215
Blodjxt Rc Tepfx Af Rep
Machine Height (mm): 1450
Machine Weight (kg): 1600
Features
• In this process, the clamp jaw secures the tube after it is inserted into the machine. The tube is bent over the die with half its diameter. When using both the mandrel and the wiper die during bending, superior results are achieved for high-quality bends, thin wall thicknesses, and minimal radii.
• This is a three-cylinder machine with a hydraulic spool located behind the hydraulic boom.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
            सूचना:        निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।    
अनुरोध भेजें
टेलीफ़ोन & फैक्स
                            +49 271 5... विज्ञापन                
            आपका विज्ञापन सफलतापूर्वक हटाया गया है            
            एक त्रुटि हुई है            






