350 लीटर की जलवायु परीक्षण चैम्बर Ex/lCTS
C-40/350 Ex/l -40°C /+180°C
350 लीटर की जलवायु परीक्षण चैम्बर Ex/l
CTS
C-40/350 Ex/l -40°C /+180°C
स्थिति
उपयोग किया हुआ
स्थान
Borken 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- 350 लीटर की जलवायु परीक्षण चैम्बर Ex/l
- निर्माता:
- CTS
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
मूल्य और स्थान
- स्थान:
- Einsteinstraße 8a, 46325 Borken, Deutschland

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A19446591
- संदर्भ संख्या:
- 24669
- अद्यतन:
- अंतिम बार 27.06.2025 को
विवरण
CTS
Type: C-40/350 Ex/l
Climate Test Chamber, Water-Cooled
ATEX Zone 1
The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions.
Temperature Testing:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K over time
Knodpfswvr H Ujx Adqof
Temperature change rate according to IEC 60068-3-5:
Heating: 3.5 K/min
Cooling: 4 K/min
Heat compensation:
approx. 3500 W at +20°C
approx. 2000 W at -20°C
Climate Testing:
Temperature range: +10°C to +90°C
Humidity range: 10% to 95% relative humidity
Dew point range: +5°C to 78°C
Temperature deviation: ≤ 1.0 K over time
Humidity deviation: ≤ ±3.0% r.h. over time
The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data.
Technical Design:
Cooling unit:
water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A
Test chamber: Floor load capacity 150 kg/m²
Rack: Stainless steel,
support surface 620 x 600 mm
Load per rack max. 35 kg
Total load with maximum rack configuration 100 kg
Control system:
32-bit controller
LCD operating panel
Digital display of setpoint and actual values
Numeric input of setpoints
Plain text fault messages
RS 232 interface
Ethernet interface
Free switching channels for user-side test item control
Dimensions:
Test volume: 350 liters
Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 7.15 kW
Nominal current: 14.3 A
Protection class: IP 54
Sound pressure level
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Type: C-40/350 Ex/l
Climate Test Chamber, Water-Cooled
ATEX Zone 1
The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions.
Temperature Testing:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K over time
Knodpfswvr H Ujx Adqof
Temperature change rate according to IEC 60068-3-5:
Heating: 3.5 K/min
Cooling: 4 K/min
Heat compensation:
approx. 3500 W at +20°C
approx. 2000 W at -20°C
Climate Testing:
Temperature range: +10°C to +90°C
Humidity range: 10% to 95% relative humidity
Dew point range: +5°C to 78°C
Temperature deviation: ≤ 1.0 K over time
Humidity deviation: ≤ ±3.0% r.h. over time
The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data.
Technical Design:
Cooling unit:
water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A
Test chamber: Floor load capacity 150 kg/m²
Rack: Stainless steel,
support surface 620 x 600 mm
Load per rack max. 35 kg
Total load with maximum rack configuration 100 kg
Control system:
32-bit controller
LCD operating panel
Digital display of setpoint and actual values
Numeric input of setpoints
Plain text fault messages
RS 232 interface
Ethernet interface
Free switching channels for user-side test item control
Dimensions:
Test volume: 350 liters
Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 7.15 kW
Nominal current: 14.3 A
Protection class: IP 54
Sound pressure level
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2012
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 2861 ... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
छोटा विज्ञापन
Haiger
6,914 km
मशीनी केंद्र
DMG MORICMX 600 V
DMG MORICMX 600 V
छोटा विज्ञापन
Schloß Holte-Stukenbrock
6,886 km
मशीनी केंद्र
Droop & ReinModimill
Droop & ReinModimill
छोटा विज्ञापन
Kaufungen
6,818 km
यूनिवर्सल मशीनिंग सेंटर
Deckel MahoDMU 80 monoblock
Deckel MahoDMU 80 monoblock
छोटा विज्ञापन
Butzbach
6,880 km
मशीनी केंद्र
Starrag-HeckertHEC500D
Starrag-HeckertHEC500D
छोटा विज्ञापन
Tatabánya
6,148 km
सतह पीसने वाली मशीन सतह पीसने वाली मशीन
JungHF 50 (2338)
JungHF 50 (2338)
छोटा विज्ञापन
Ruhla
6,763 km
5-अक्ष मिलिंग मशीन
Deckel MahoDMU 70 eVlin
Deckel MahoDMU 70 eVlin
छोटा विज्ञापन
Nauen
6,604 km
डिसॉल्वर वोलरथ ईडब्ल्यूएफएक्स 60
Dissolver VollrathEWFX 60
Dissolver VollrathEWFX 60
छोटा विज्ञापन
Wilbertoord
7,086 km
मशीनिंग केंद्र - लंबवत
DMGDMU 40 Mono Block
DMGDMU 40 Mono Block
छोटा विज्ञापन
Arnsberg
6,934 km
मिक्सको मिक्सर सीएम 1000
MixacoCM 1000
MixacoCM 1000
छोटा विज्ञापन
Sinsheim
6,863 km
विघटित करने वाला
Schneider Maschinenbau GmbhSHDC15 KWFU Ex
Schneider Maschinenbau GmbhSHDC15 KWFU Ex
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है































































































