तापमान परीक्षण कैबिनेट पूर्व संरक्षितCTS
T-30/950 Ex/I
तापमान परीक्षण कैबिनेट पूर्व संरक्षित
CTS
T-30/950 Ex/I
निर्माण वर्ष
2011
स्थिति
उपयोग किया हुआ
स्थान
Borken 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- तापमान परीक्षण कैबिनेट पूर्व संरक्षित
- निर्माता:
- CTS
- मॉडल:
- T-30/950 Ex/I
- निर्माण वर्ष:
- 2011
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
मूल्य और स्थान
- स्थान:
- Einsteinstraße 8a, 46325 Borken, Deutschland

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A7538378
- संदर्भ संख्या:
- 23117
- अद्यतन:
- अंतिम बार 27.06.2025 को
विवरण
CTS
Type: T-30/950 Ex/I
CTS Temperature Test Chamber, Explosion-Proof
Control – 32-bit controller
LCD control panel
Digital display for set and actual values
Numerical input of set values
Error messages in plain text
RS 232 interface
Free switching channels for product-side test specimen activation
Temperature Testing:
Temperature range: -30°C to +80°C
Temperature deviation: ±0.3 K over time
Temperature change rate:
Heating: 2 K/min
Cooling: 1.5 K/min down to -10°C
Thermal radiation: approx. 1000 W at +20°C
approx. 200 W at -25°C
Nitrogen inerting with residual oxygen monitoring
With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the
o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate).
The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch.
O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air.
Afterwards, the gas is returned to the test chamber via a second flame arrestor.
The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix.
The gas system is currently deactivated!
Lhedeihb Amspfx Adqer
All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment.
Dimensions:
Test chamber volume: 950 liters
Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm
External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm
Operating data:
Electrical connection: 400V +6/-10 %, 3/N, 50 Hz
Nominal power: 21.6 kW
Rated current: 36.5 A
Protection class: IP 54
Condensate drain: non-pressurized, R 1/2" inner thread
Sound pressure level:
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Type: T-30/950 Ex/I
CTS Temperature Test Chamber, Explosion-Proof
Control – 32-bit controller
LCD control panel
Digital display for set and actual values
Numerical input of set values
Error messages in plain text
RS 232 interface
Free switching channels for product-side test specimen activation
Temperature Testing:
Temperature range: -30°C to +80°C
Temperature deviation: ±0.3 K over time
Temperature change rate:
Heating: 2 K/min
Cooling: 1.5 K/min down to -10°C
Thermal radiation: approx. 1000 W at +20°C
approx. 200 W at -25°C
Nitrogen inerting with residual oxygen monitoring
With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the
o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate).
The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch.
O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air.
Afterwards, the gas is returned to the test chamber via a second flame arrestor.
The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix.
The gas system is currently deactivated!
Lhedeihb Amspfx Adqer
All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment.
Dimensions:
Test chamber volume: 950 liters
Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm
External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm
Operating data:
Electrical connection: 400V +6/-10 %, 3/N, 50 Hz
Nominal power: 21.6 kW
Rated current: 36.5 A
Protection class: IP 54
Condensate drain: non-pressurized, R 1/2" inner thread
Sound pressure level:
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2012
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 2861 ... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
छोटा विज्ञापन
Tata
6,158 km
लिक्विड रिकूलर कंडेनसर
Güntner GVH 090.1.D/5-M(D)680,4 /579,2 kw
Güntner GVH 090.1.D/5-M(D)680,4 /579,2 kw
छोटा विज्ञापन
Hochdorf
6,820 km
तापमान शीतलन इकाई (टीसीयू)
SingleCompact WK3-160-9-50 (IM160F)
SingleCompact WK3-160-9-50 (IM160F)
छोटा विज्ञापन
Berlin
6,574 km
अक्षीय संघनित्र
Güntner AGGVH 100.2A/2x3-J(D)
Güntner AGGVH 100.2A/2x3-J(D)
छोटा विज्ञापन
Forst
6,887 km
100 वर्ग मीटर का बफर टैंक, 3 बार, इंसुलेटेड
छोटा विज्ञापन
Delmenhorst
6,892 km
1000L दबाव टैंक बफर भंडारण
10539
10539
छोटा विज्ञापन
Schmölln
6,622 km
ठंडा कमरा
Dresdner Kühlanlagenbau
Dresdner Kühlanlagenbau
छोटा विज्ञापन
Niedźwiedź
6,062 km
दो-चरणीय कंप्रेसर इकाई
BitzerS6G-25.2Y (x4)
BitzerS6G-25.2Y (x4)
छोटा विज्ञापन
Nattheim
6,764 km
स्थायी पैनल देखा
Holz-Her1255
Holz-Her1255
छोटा विज्ञापन
Borken
7,009 km
1000 लीटर आर्द्रता के साथ जलवायु परीक्षण कक्ष
CTSC-40/1000 -40°C bis +180°C
CTSC-40/1000 -40°C bis +180°C
छोटा विज्ञापन
Wiefelstede
6,930 km
वेंटिलेशन प्रणाली
HeimerWK-61
HeimerWK-61
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है




























































































