CNC टर्निंग और मिलिंग सेंटर

DMG MORI CLX 350 V6

Technical Data

Total operating hours: 1759 h
Spindle hours: 1130 h

Control system: DMG MORI SLIMline® multi-touch control (19" / Operate SIEMENS)
Max. turning diameter: 320 mm
Max. turning length: 530 mm
Max. bar capacity: 65 mm
Travel X-axis: 242 mm
Travel Y-axis: 80 mm
Travel Z-axis: 540 mm
Max. spindle speed: 5000 rpm
Spindle drive: 16.5 kW
Machine weight: approx. 5 t
Footprint: m

Standard Equipment

Ergonomic control panel DMG MORI SLIMline®
Main spindle: A2-6 with AC motor
Drive power: 11 / 16.5 kW (100/40% duty cycle), 5000 rpm
12-station servo turret: VDI 30 mounting, with 12 driven tool stations and precise Trifix® interfaces (DIN5480 coupling)
Direct measuring system: X-, Y-axis
Chip pan
Hollow clamping device: max. bar capacity D65 mm
Sub spindle A2-5, executed as ISM 63 motor spindle with hydraulic clamping device,
Drive power: 12.6 / 16.2 kW (100/40% duty cycle), 5000 rpm
External electronic handwheel
Hfedpfx Ajyuy Ensh Hsd
Y-axis: +/- 40 mm
DMG MORI loTconnector

Special Equipment

- Bar package & interface includes:
- Workpiece removal device for parts up to D65 x 200 mm length, max. workpiece weight 3 kg, parts tray in front of the machine (outside work area).
- Interface for bar feeder or bar loading device (MG MORI standard interface)
- Chip conveyor, right-side discharge in place of chip tray
- 4-color signal lamp
- Hydraulic 3-jaw chuck, SMW KNCS-N 225-66 with quick-change system
- Collet chuck HAINBUCH SPANNTOP size 65
- Differential pressure clamping for sub spindle
- External chuck rinsing for sub spindle
- Automatic workpiece ejector for sub spindle with internal coolant supply for clamping device rinsing
- Hydraulic 3-jaw chuck SMWBD-175 for sub spindle

- Coolant system 5-20 bar
Option includes:
- High-pressure pump, 5-20 bar (adjustable)
- Dual cartridge filter for coolant

- Coolant spray gun 5 bar

- Pre-installation for oil mist extractor
Option only includes mechanical and electrical pre-installation for AFS 60, diameter: 200 mm

- Manual tool measurement device in working area, make: MARPOSS

- Automatic loading magazine for short bars
IEMCA KID80/16, bar capacity D65
Material pusher D=12 mm, D=15 mm, D=21 mm, D=26 mm
Interface: DMG MORI standard
Guide rails for movement along spindle axis
Color: DMG MORI standard
Available functions for bar feeder:
- Bar feed M69
- Bar change M65
- Handshake M66

- Parts conveyor
Parts conveyor in front of the machine with left-side discharge instead of parts tray. Conveyor located outside the working area

All information without guarantee.

इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।