शक्ति ग्रेडिंग मशीन C24(C40) और TR26Dynalyse
Dynagrade
शक्ति ग्रेडिंग मशीन C24(C40) और TR26
Dynalyse
Dynagrade
EXW स्थिर मूल्य कर के अतिरिक्त
€16,000
स्थिति
उपयोग किया हुआ
स्थान
Kalme 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- शक्ति ग्रेडिंग मशीन C24(C40) और TR26
- निर्माता:
- Dynalyse
- मॉडल:
- Dynagrade
- मशीन नंबर:
- 057
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
EXW स्थिर मूल्य कर के अतिरिक्त
€16,000
- स्थान:
- Kalme, एस्टोनिया

प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A17542298
- अद्यतन:
- अंतिम बार 09.05.2025 को
विवरण
New price ca 100 000.- EUR
The Dynagrade equipment is a product for on-line strength grading of structural
timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market
.
It is especially suitable for installation in sawmill sorting lines or planing
mills or comparable plants where sawn (or planed) timber is transported by means
of an existing cross-conveyor system.
The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones).
Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m).
Main prerequisites:
Limber/timber size and length 1):
Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm
Sawn or planed surface
Dried lumber/timber, cut to angle
Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)
Nljdpfxou Dnf Ie Ab Rsh
The Dynagrade equipment is a product for on-line strength grading of structural
timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market
.
It is especially suitable for installation in sawmill sorting lines or planing
mills or comparable plants where sawn (or planed) timber is transported by means
of an existing cross-conveyor system.
The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones).
Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m).
Main prerequisites:
Limber/timber size and length 1):
Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm
Sawn or planed surface
Dried lumber/timber, cut to angle
Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)
Nljdpfxou Dnf Ie Ab Rsh
दस्तावेज़
अनुरोध भेजें
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है















