कोल्ड रोलिंग मशीनEXCELLO
XK 225
कोल्ड रोलिंग मशीन
EXCELLO
XK 225
निर्माण वर्ष
1987
स्थिति
उपयोग किया हुआ
स्थान
Metzingen 

मूल आधारभूत जानकारी
- मशीन का नाम:
- कोल्ड रोलिंग मशीन
- निर्माता:
- EXCELLO
- मॉडल:
- XK 225
- निर्माण वर्ष:
- 1987
- स्थिति:
- उपयोग किया हुआ
मूल्य और स्थान
- स्थान:
- Metzingen

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A16567031
- संदर्भ संख्या:
- 1049-346254
- अद्यतन:
- अंतिम बार 17.07.2024 को
विवरण
rolling capacity max. NA t
Knedpfet Hw D Dex Adwsd
workpiece diameter 38 mm
workpiece length 500 mm
total power requirement 24 kW
weight of the machine ca. 10 t
dimensions of the machine ca. m
Max.Ø tool slide stroke 760 mm
Max.Ø rack length 610 mm
Length of workpiece between centres, approx. 500 mm
Max. tooth width / profile width 92 mm
Max. workpiece Ø 38 mm
Tailstock stroke on outboard support, hydraulic, approx. 500 mm
Module range 0.3 - 1.3
Total electrical load, approx. 24 kW - 380 V - 50 Hz
Weight, approx. 10,000 kg
Accessories / Special Features
* KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control.
* Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long.
* Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l.
* Coolant device in the machine. * Control panel with malfunction message in plaintext, etc.
Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations.
Condition : Very good. Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
Knedpfet Hw D Dex Adwsd
workpiece diameter 38 mm
workpiece length 500 mm
total power requirement 24 kW
weight of the machine ca. 10 t
dimensions of the machine ca. m
Max.Ø tool slide stroke 760 mm
Max.Ø rack length 610 mm
Length of workpiece between centres, approx. 500 mm
Max. tooth width / profile width 92 mm
Max. workpiece Ø 38 mm
Tailstock stroke on outboard support, hydraulic, approx. 500 mm
Module range 0.3 - 1.3
Total electrical load, approx. 24 kW - 380 V - 50 Hz
Weight, approx. 10,000 kg
Accessories / Special Features
* KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control.
* Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long.
* Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l.
* Coolant device in the machine. * Control panel with malfunction message in plaintext, etc.
Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations.
Condition : Very good. Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 7123 ... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Ljubljana
6,431 km
सीएनसी प्लेट ड्रिलिंग मशीन
ScharmannHeavycut 3.2
ScharmannHeavycut 3.2
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
आयरलैंड
8,033 km
न्यूस्मिथ क्रेट/ट्रे वॉशर
NewsmithKM1726
NewsmithKM1726
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Bad Bramstedt
6,817 km
कार्यक्षेत्र मशीनिंग केंद्र
CHIRONFZ 15 W
CHIRONFZ 15 W
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Neulingen-Göbrichen
6,877 km
मशीन शक्ति के अंतर्गत अनुलंब broaching
RauschRS 10 x 915
RauschRS 10 x 915
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Offenbach an der Queich
6,914 km
काटने और केन्द्रित करने की मशीन
UMA - SZMSZM 100/1000
UMA - SZMSZM 100/1000
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
जर्मनी
6,760 km
सीएनसी मशीनिंग केंद्र
ChironFZ 15 S
ChironFZ 15 S
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
जर्मनी
6,760 km
ड्राइंग मशीन
SchumagKZ II B
SchumagKZ II B
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Agios Athanasios
5,600 km
ब्रोचिंग मशीन
BROACHING MACHINE
BROACHING MACHINE
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Warren
12,778 km
गियरव्हील आकार देने वाली मशीन
Gleason100S
Gleason100S
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Weiterstadt
6,885 km
बेलनाकार पीसने की मशीन
SKFRSM 2
SKFRSM 2
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है























































































