चित्रकारी करने वाले रोबोट, चित्रकार, औद्योगिक रोबोटFANUC
P-250iA/15
चित्रकारी करने वाले रोबोट, चित्रकार, औद्योगिक रोबोट
FANUC
P-250iA/15
निर्माण वर्ष
2007
स्थिति
उपयोग किया हुआ
(पूरी तरह से कार्यरत)
स्थान
Krostitz 

मूल आधारभूत जानकारी
- मशीन का नाम:
- चित्रकारी करने वाले रोबोट, चित्रकार, औद्योगिक रोबोट
- निर्माता:
- FANUC
- मॉडल:
- P-250iA/15
- मशीन नंबर:
- 82351
- निर्माण वर्ष:
- 2007
- स्थिति:
- लगभग नया (उपयोग किया हुआ)
- कार्यक्षमता:
- पूरी तरह से कार्यरत
- प्रचालन घंटे:
- 92 h
मूल्य और स्थान
- स्थान:
- Hilchenbacher Str. 1, 04509 Krostitz, Deutschland

कॉल करें
तकनीकी विवरण
आकार और वजन
कुल वजन:
520 किग्रा
शक्ति विवरण
इनपुट वोल्टेज:
400 V
इनपुट करंट:
20 A
इनपुट करेंट का प्रकार:
एसी
अधिक विवरण
नियंत्रक निर्माता:
FANUC
कंट्रोलर मॉडल:
RJ3iC
भार क्षमता:
15 किग्रा
बाँह की पहुँच:
2,800 मिमी
नियंत्रण कैबिनेट की ऊँचाई:
1,360 मिमी
कंट्रोल कैबिनेट की चौड़ाई:
800 मिमी
पिवटिंग रेंज:
320 °
पुनरावृत्ति सटीकता:
2 मिमी
टीच पेंडेंट निर्माता:
FANUC
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A16279249
- अद्यतन:
- अंतिम बार 12.12.2025 को
विवरण
This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem.
The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special.
We give a 1-year commissioning guarantee.
Kodpfx Adotu H Avewsdw
We can help with transportation and installation.
It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation.
At the moment it is configured as right-armed and right-handed.
However, this can easily be changed without mechanical conversion.
The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest.
We would bring the device to us from Frankfurt.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special.
We give a 1-year commissioning guarantee.
Kodpfx Adotu H Avewsdw
We can help with transportation and installation.
It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation.
At the moment it is configured as right-armed and right-handed.
However, this can easily be changed without mechanical conversion.
The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest.
We would bring the device to us from Frankfurt.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2020
9 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 34295... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Krostitz
6,623 km
कलाई फैनुक रोबोट P-250iA 15
FANUCP-250iA/15
FANUCP-250iA/15
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Juszczyn
6,089 km
बेंच मिलिंग मशीन
SCMT130E
SCMT130E
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Krostitz
6,623 km
चित्रकारी करने वाले रोबोट, चित्रकार, औद्योगिक रोबोट
FANUCP-250iA/15
FANUCP-250iA/15
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Krostitz
6,623 km
पेंटिंग रोबोट, औद्योगिक रोबोट
FANUCP-250iA/15
FANUCP-250iA/15
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Cantù
6,845 km
हाइड्रोलिक द्रव झिल्ली प्रेस
ITALPRESSEFORMATIC 20.9
ITALPRESSEFORMATIC 20.9
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Zamość
5,867 km
काटने और प्रसंस्करण केंद्र DG 244 + E580/1
ElumatecDG 244 + E580/1 ROK 2019
ElumatecDG 244 + E580/1 ROK 2019
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Waghäusel
6,891 km
एलिवेटिंग कन्वेयर के साथ डाइसर
EillertBL 1000
EillertBL 1000
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
जर्मनी
6,627 km
मशीनिंग केंद्र - लंबवत
HURCOVMX 42
HURCOVMX 42
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Kežmarok
6,027 km
कोणीय विंडो मशीनिंग सेंटर
WeinigUnicontrol 10
WeinigUnicontrol 10
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Jonava
5,929 km
21-29-543 ब्रश सैंडिंग मशीन
WOODLAND MACHINERYSK-1000-P6
WOODLAND MACHINERYSK-1000-P6
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है


























































































































