एज बैंडिंग मशीन

Felder G650 x-motion

incl. joining unit up to max. 2mm chip removal, edge thickness 0.4-5mm, workpiece height 8-60mm, 11m/min feed speed, min. workpiece dimensions L=140mm W=70mm, automatic feeding of roll materials, individual feeding of strip materials, impact shears for rigid PVC/ABS up to 3mm thick, Teflon-coated glue tray with 2kg, glue application with glue roller

3x 400 V motor voltage, 50 Hz motor frequency, max. connected load 7.0 kW
Joining unit with 2 slide milling cutters up to max. 2 mm chip removal
Min. workpiece width: *The minimum workpiece width varies depending on workpiece length, height and surface finish: 70 mm
Csdpfovfnqpox Aa Ejrh
Endless edge feed via support plate, Ø 720 mm, for PVC/ABS
Automatic edge feed for edging materials 0.4-5 mm thick
Impact shears for continuous edging material up to 3 mm thick in rigid PVC/ABS
Glue unit Teflon-coated, 2 kg for hot-melt adhesive granulate
Mechanically pre-tensioned pressure unit, 1 straight pressure roller and 2 holding pressure rollers; adjustment via dial gauge
Cross-cut saw unit with HF motor, pneu. Adjustment of 0°/20° bevel cross-cuts
Multifunction trimming unit, 12,000 rpm, 2x 0.55 kW, pneumatic selection for radius, flush and chamfer trimming for thin edges
Radius scraper unit, mechanically switchable for R=2 mm
Surface scraper unit, can be switched on mechanically
Polishing unit, 2 motors,
Spraying device for cleaning agent in front of polishing unit
Pivoting control panel with 5.7" color touch screen
Color touch screen Workpiece transport via chain conveyor
Pull-out workpiece support

Further technical data:
Workpiece length: min. 140 mm
Suction connection: 2 x 80 / 1 x 120 mm
Edge thickness: 0.4 - 5.0 mm
Feed speed: 11 m/min
Workpiece width: 70 mm
Workpiece thickness: 8 - 60 mm

इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।