पैनल आराGiben
PRISMA EVO SP
पैनल आरा
Giben
PRISMA EVO SP
EXW VB कर के अतिरिक्त
€25,000
निर्माण वर्ष
2018
स्थिति
उपयोग किया हुआ
(पूरी तरह से कार्यरत)
स्थान
Vranov nad Topľou 

मशीन के बारे में जानकारी
- मशीन का नाम:
- पैनल आरा
- निर्माता:
- Giben
- मॉडल:
- PRISMA EVO SP
- निर्माण वर्ष:
- 2018
- स्थिति:
- अच्छी स्थिति (इस्तेमाल किया हुआ)
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
EXW VB कर के अतिरिक्त
€25,000
- स्थान:
- Čemernianska 137, 093 03 Vranov nad Topľou, Slovensko

कॉल करें
तकनीकी विवरण
- शक्ति:
- 7.5 किलोवाट (10.20 एचपी)
- इनपुट वोल्टेज:
- 400 V
- इनपुट आवृत्ति:
- 50 Hz
- आरा ब्लेड का व्यास:
- 380 मिमी
- उपकरण:
- प्रलेखन / मैन्युअल
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A21950658
- अद्यतन:
- अंतिम बार 19.05.2026 को
विवरण
Number of clamps: 6
Cutting length: 3800 mm
Max. saw blade overhang: 90 mm
Air tables: 4x
Features include “post-forming” for a single panel or a stack of laminated panels, a linear motor for moving the saw carriage without any friction or mechanical components, a speed exceeding 200 m/min, and an acceleration of almost “1g”, among many others.
PRISMA EVO is a cutting center without a motor on the saw carriage (patented), and thanks to this extraordinary innovation, all causes of vibration are definitively eliminated, which improves the quality of the cut surface and ensures a longer blade life.
Kledoy S Rhcepfx Aamst
PRISMA EVO uses linear guides with ball bearings for all sliding movements of the saw carriage, the pressure beam, and the side pressure device as standard.
The feeder of this model is automatic, electronically controlled, and equipped with a brushless motor. The side aligner is “permanently engaged,” which guarantees a faster cross-cutting cycle for a single strip. The side aligner slides on a linear guide, ensuring smooth and clean movements, and is wear-resistant and virtually maintenance-free.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Cutting length: 3800 mm
Max. saw blade overhang: 90 mm
Air tables: 4x
Features include “post-forming” for a single panel or a stack of laminated panels, a linear motor for moving the saw carriage without any friction or mechanical components, a speed exceeding 200 m/min, and an acceleration of almost “1g”, among many others.
PRISMA EVO is a cutting center without a motor on the saw carriage (patented), and thanks to this extraordinary innovation, all causes of vibration are definitively eliminated, which improves the quality of the cut surface and ensures a longer blade life.
Kledoy S Rhcepfx Aamst
PRISMA EVO uses linear guides with ball bearings for all sliding movements of the saw carriage, the pressure beam, and the side pressure device as standard.
The feeder of this model is automatic, electronically controlled, and equipped with a brushless motor. The side aligner is “permanently engaged,” which guarantees a faster cross-cutting cycle for a single strip. The side aligner slides on a linear guide, ensuring smooth and clean movements, and is wear-resistant and virtually maintenance-free.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
अंतिम बार ऑनलाइन: पिछले सप्ताह
से पंजीकृत: 2026
1 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+421 903 ... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है








