एज बैंडिंग मशीनGriggio
GTM 4/3
एज बैंडिंग मशीन
Griggio
GTM 4/3
EXW VB कर के अतिरिक्त
€8,000
निर्माण वर्ष
2017
स्थिति
उपयोग किया हुआ
(पूरी तरह से कार्यरत)
स्थान
Cisnădie 

मूल आधारभूत जानकारी
- मशीन का नाम:
- एज बैंडिंग मशीन
- निर्माता:
- Griggio
- मॉडल:
- GTM 4/3
- मशीन नंबर:
- 17E000332104800
- निर्माण वर्ष:
- 2017
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
- कार्यक्षमता:
- पूरी तरह से कार्यरत
- प्रचालन घंटे:
- 300 h
मूल्य और स्थान
EXW VB कर के अतिरिक्त
€8,000
- स्थान:
- Cetatii, nr.20, 555300 Cisnădie, România

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A19865915
- अद्यतन:
- अंतिम बार 17.05.2026 को
विवरण
1. AUTOMATIC EDGEBANDING MACHINE Model GTM 4/3 – GRIGGIO
The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units:
a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning.
b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers.
c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle
• Installed power: 0.38 kW
• Blade speed: 12,000 rpm
d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel
• Motor power: 0.55 kW
e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge
• Supplied with a pair of knives for use with 2 mm ABS edging
f) Buffing unit
• Two independent motors for cleaning/polishing the edge banding
• Installed power: 0.19 kW
• Equipped with 100 mm diameter brushes
Maximum panel thickness: 45 mm
Minimum panel width: 90 mm
Minimum panel length: 200 mm
Feed speed: 9.5 m/min
Edgebanding overhang (top + bottom): 4 mm (2+2)
Pneumatic system pressure: 6 bar
Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed
General features:
• The machine frame is constructed from a single-piece, high-rigidity steel sheet.
• Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber.
• The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups.
• Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement.
Included spare parts kit (in machine price):
- 2 upper rubber pressure rollers
- 1 rubber roller for end trimming unit
- 2 cotton buffing discs
- 5 rubber pads for feed conveyor track
- 4 adhesive pot heating elements
- 1 temperature probe
EXW price: €10,000 (excluded VAT)
Manufactured in EU
Excellent condition
No pre-milling unit
Operating hours: 300 h
Hnjdsw Tkl Nepfx Abvjw
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units:
a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning.
b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers.
c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle
• Installed power: 0.38 kW
• Blade speed: 12,000 rpm
d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel
• Motor power: 0.55 kW
e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge
• Supplied with a pair of knives for use with 2 mm ABS edging
f) Buffing unit
• Two independent motors for cleaning/polishing the edge banding
• Installed power: 0.19 kW
• Equipped with 100 mm diameter brushes
Maximum panel thickness: 45 mm
Minimum panel width: 90 mm
Minimum panel length: 200 mm
Feed speed: 9.5 m/min
Edgebanding overhang (top + bottom): 4 mm (2+2)
Pneumatic system pressure: 6 bar
Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed
General features:
• The machine frame is constructed from a single-piece, high-rigidity steel sheet.
• Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber.
• The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups.
• Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement.
Included spare parts kit (in machine price):
- 2 upper rubber pressure rollers
- 1 rubber roller for end trimming unit
- 2 cotton buffing discs
- 5 rubber pads for feed conveyor track
- 4 adhesive pot heating elements
- 1 temperature probe
EXW price: €10,000 (excluded VAT)
Manufactured in EU
Excellent condition
No pre-milling unit
Operating hours: 300 h
Hnjdsw Tkl Nepfx Abvjw
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
दस्तावेज़
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2024
1 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+40 722 3... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
जर्मनी
6,760 km
ड्रायर
Cremona
Cremona
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Budapest
6,101 km
तापन प्रणाली
MaweraFU350RIA
MaweraFU350RIA
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Jonava
5,927 km
सूखाने का प्लांट
PROLAINCDK-170-9-36
PROLAINCDK-170-9-36
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Sonsbeck
7,044 km
सार्वभौमिक परीक्षण मशीन तन्यता परीक्षण मशीन
Hegewald & Peschke/HessH2,5TMNI
Hegewald & Peschke/HessH2,5TMNI
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Bad Sooden-Allendorf
6,793 km
एज बैंडिंग मशीन
BMS - BlaichKantenfix B2
BMS - BlaichKantenfix B2
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Kežmarok
6,027 km
HOLZMA मशीनों के लिए सेट देखा ब्लेड
FABA + AKE600 x 5,8 / 4,0x60 Z=72 + 200 / 45 Z=36
FABA + AKE600 x 5,8 / 4,0x60 Z=72 + 200 / 45 Z=36
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Stary Sącz
6,023 km
PET 5 L की बोतलों के लिए भराई और कैपिंग मशीन
RIVI Bottling Ermes 12+ ZALKIN 4
RIVI Bottling Ermes 12+ ZALKIN 4
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Schwanberg
6,382 km
फॉर्मेट आरी
MARTINT74
MARTINT74
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Skarżysko-Kamienna
6,037 km
पाउडर बूथ
ROMERKabina do malowania proszkowego
ROMERKabina do malowania proszkowego
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Lanaken
7,096 km
हीटिंग बॉयलर - तेल
AuraAKL 2504 G
AuraAKL 2504 G
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है



















































































