यूनिवर्सल परीक्षण मशीन / तन्य परीक्षण मशीन

Hegewald & Peschke Inspekt Table Blur 5

Universal Testing Machine Inspekt Table Blue 5 kN
Redpjyyu I Nefx Aatsr

Mechanical Design:

- 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm
- 1 test space up to nominal load:
- Test space width: 420 mm
- Max. test stroke without test tools, adapters, and KMZ: 1025 mm

Travel Speeds:

- Test speed: 0.0015 – 1000 mm/min at full load
- Return speed: 1000 mm/min

Force Measurement:

- Measuring range: 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5)
(+/- 1% of the displayed value according to DIN EN ISO 7500-1)
- Force measurement resolution: +/-180,000 digits at 20 ms integration time

The machine is delivered with a factory test certificate. If factory or DKD calibration at the installation site is requested by the customer, this will incur additional costs.

Crosshead Travel Measurement:

- Incremental square-wave input with encoder monitoring, saves crosshead position
- Crosshead travel resolution: 1 μm

Dimensions (W x D x H) / Weight:

- Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – controller mounted on the load frame

Standard Functions:

- Force, displacement, and strain control
- Overload protection, automatic force calibration
- Specimen break detector, return function
- Set-up mode via control panel with display (force, displacement)

Data Processing:

- USB 2.0 interface or LAN
- Data transfer rate to PC: 50 Hz (standard); optionally, higher data acquisition frequency via special software add-on module
- Internal data processing rate: 2 ms
- Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors

Power Supply / Operating Conditions:

- 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity
- Required options for operation: load cell, grips, PC (current standard, OS 8-10-11), test software


5000 N Load Cell

- Measuring range: 5–5000 N for tension and compression, with nominal 2 mV/V output signal
- Overload protection: +/-100%
- Linearity: +/-0.05%
- Hysteresis: +/-0.03%
- Repeatability: +/-0.02%
- Incl. 1.5 m connection cable and calibration certificate

Supplied with Extensometer MFX 200

The MFX 200-B extensometer, with its robust construction and high measurement accuracy, is suitable for almost all specimens with an initial gauge length from 10 mm. All strains can be measured, from the modulus of elasticity up to specimen break. It can be used unrestrictedly in both the lower and upper test areas. In combination with the MFQ-A, r- and n-value measurements on sheet metal are also possible. Two different measurement systems are available, differing in their signal and technical specifications (see technical documentation).

इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।