विभाजकHet Stempel
Pilot Crystallizer
विभाजक
Het Stempel
Pilot Crystallizer
निर्माण वर्ष
2014
स्थिति
उपयोग किया हुआ
स्थान
Lopik 

मूल आधारभूत जानकारी
- मशीन का नाम:
- विभाजक
- निर्माता:
- Het Stempel
- मॉडल:
- Pilot Crystallizer
- निर्माण वर्ष:
- 2014
- स्थिति:
- लगभग नया (उपयोग किया हुआ)
मूल्य और स्थान
- स्थान:
- Lopik, नीदरलैंड

प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A22893365
- अद्यतन:
- अंतिम बार 06.10.2026 को
विवरण
Pilot Crystallizer
Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development.
Including:
2 tanks, 5 liters each, for water and fat-phase ingredients.
1 buffer tank, 20 liters.
High-pressure pump, up to 75 bar.
Lodpfx Adsz Iy Hzjweai
3 crystallization cylinders, named A1 + A2 + A3.
2 pin mixers, named C75 + C150.
1 rework melter, C heat.
1 resting tube, named B200.
The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping.
The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor.
The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube.
A temperature sensor is located after each unit.
The capacity is variably adjustable, up to 50 liters per hour.
Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser.
There are 3 independent cooling circuits (for each crystallizer).
The tanks are double-jacketed, with an agitator and temperature sensors.
The entire unit is built on a frame and is mobile.
The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems.
The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves.
All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss.
An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development.
Including:
2 tanks, 5 liters each, for water and fat-phase ingredients.
1 buffer tank, 20 liters.
High-pressure pump, up to 75 bar.
Lodpfx Adsz Iy Hzjweai
3 crystallization cylinders, named A1 + A2 + A3.
2 pin mixers, named C75 + C150.
1 rework melter, C heat.
1 resting tube, named B200.
The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping.
The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor.
The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube.
A temperature sensor is located after each unit.
The capacity is variably adjustable, up to 50 liters per hour.
Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser.
There are 3 independent cooling circuits (for each crystallizer).
The tanks are double-jacketed, with an agitator and temperature sensors.
The entire unit is built on a frame and is mobile.
The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems.
The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves.
All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss.
An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
अनुरोध भेजें
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Nattheim
6,764 km
स्थायी पैनल देखा
FelderKappa V 60
FelderKappa V 60
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Mönchengladbach
7,039 km
कुंडा झुकने मशीन
RASRAS UpDownCenter 78.33
RASRAS UpDownCenter 78.33
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
जर्मनी
6,760 km
प्रेस ब्रेक - हाइड्रोलिक
TRUMPFTrubent 3120
TRUMPFTrubent 3120
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
London
7,491 km
ब्रूहाउस (शराब बनाने की जगह)
Ziemann300hl Brewhouse
Ziemann300hl Brewhouse
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Agios Athanasios
5,600 km
हाइड्रॉलिक प्रेस
MULLER250t
MULLER250t
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Emmeloord
7,087 km
2018 क्रोनन KUJ घन, स्ट्रिप और स्लाइस कटिंग मशीन इनफीड कन्वेयर के साथ
KronenKUJ
KronenKUJ
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Goldenstedt
6,906 km
कुंडा झुकने मशीन
RAS67.30
RAS67.30
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Ringaudai
5,951 km
वेल्डिंग सेट
FRONIUSPLASMA WELDING
FRONIUSPLASMA WELDING
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Κερατσίνι
5,623 km
उच्च शक्ति डायोड लेजर
LaserlineLdf 3000-30
LaserlineLdf 3000-30
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Laufenburg (Baden)
6,923 km
MABI 3000E वैरियो
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है



























































































