एज बैंडिंग मशीनHOMAG
KL 78/A20/52
एज बैंडिंग मशीन
HOMAG
KL 78/A20/52
EXW स्थिर मूल्य कर के अतिरिक्त
€6,900
स्थिति
उपयोग किया हुआ
स्थान
Detmold 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- एज बैंडिंग मशीन
- निर्माता:
- HOMAG
- मॉडल:
- KL 78/A20/52
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
EXW स्थिर मूल्य कर के अतिरिक्त
€6,900
- स्थान:
- Grundstr. 18, 32760 Detmold, DE
कॉल करें
तकनीकी विवरण
- कुल लंबाई:
- 9,300 मिमी
- कुल वजन:
- 4,000 किग्रा
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A19828010
- अद्यतन:
- अंतिम बार 27.09.2025 को
विवरण
Feed infinitely variable from 18–24 m/min
For edge material from rolls or as strips up to 20 mm edge thickness
Crsdjw Sdlmspfx Aa Ejh
Transport chain 80 mm wide with rubber coating
Workpiece support – scissor-type, extendable up to 1000 mm
Infeed extension 500 mm
Feeding device with two driven, angled rollers
Processing units:
Jointing cutter unit with 2 motors, each 3 kW
Gluing unit A20
Trimming unit HL83, chamfer/straight with 2 motors, each 0.5 kW
Pre-milling unit with 2 motors, each 1.5 kW
Contouring/milling unit FK, 8-position automatic, with 2 motors each 0.55 kW
Multi-stage finish sanding unit MN, automatic
Finish sanding unit for glue joint
Buffing unit above and below with oscillation
Chip conveyor belt
Electronic frequency inverters for processing units
HOMATIC control system with NC21 input module
Good condition of the machine.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
For edge material from rolls or as strips up to 20 mm edge thickness
Crsdjw Sdlmspfx Aa Ejh
Transport chain 80 mm wide with rubber coating
Workpiece support – scissor-type, extendable up to 1000 mm
Infeed extension 500 mm
Feeding device with two driven, angled rollers
Processing units:
Jointing cutter unit with 2 motors, each 3 kW
Gluing unit A20
Trimming unit HL83, chamfer/straight with 2 motors, each 0.5 kW
Pre-milling unit with 2 motors, each 1.5 kW
Contouring/milling unit FK, 8-position automatic, with 2 motors each 0.55 kW
Multi-stage finish sanding unit MN, automatic
Finish sanding unit for glue joint
Buffing unit above and below with oscillation
Chip conveyor belt
Electronic frequency inverters for processing units
HOMATIC control system with NC21 input module
Good condition of the machine.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
दस्तावेज़
19828010-01.pdf (PDF)19828010-02.pdf (PDF)
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2006
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 5231 ... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है