गोलाई और बेलनाकारता मापने का उपकरणHommel Jenoptik
Hommel Etamic 4004
गोलाई और बेलनाकारता मापने का उपकरण
Hommel Jenoptik
Hommel Etamic 4004
निर्माण वर्ष
2009
स्थिति
उपयोग किया हुआ
स्थान
Mielec 

मूल आधारभूत जानकारी
- मशीन का नाम:
- गोलाई और बेलनाकारता मापने का उपकरण
- निर्माता:
- Hommel Jenoptik
- मॉडल:
- Hommel Etamic 4004
- निर्माण वर्ष:
- 2009
- स्थिति:
- उपयोग किया हुआ
मूल्य और स्थान
- स्थान:
- SSE EURO-PARK, Polskiego 3, 39-300 Wojska, Polen

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A23356949
- अद्यतन:
- अंतिम बार 19.11.2026 को
विवरण
Application area and features:
Isdpfs Ak Huzsx Ah Seii
• Measurement task: Determination of form and position tolerances (e.g. circularity and flatness) as well as evaluation using software solutions such as Turbo Form.
• Workpiece alignment: Automatic centering and tilting of the workpiece (in contrast to the F1004 and F2004 variants with manual alignment).
• Air-bearing rotary axis (C-axis): Rotary table with a diameter of 250 mm, a speed of 1–10 rpm, and a 4096-point angular resolution.
Technical specifications (according to the F1004–F4004 data sheet):
• Max. measuring height: 350 mm (in practice, larger workpiece dimensions are also specified depending on the measuring setup/application).
• Max. test diameter: 380 mm.
• Max. load: 40 kg.
• Circularity deviation: 0.05 µm + 0.0005 µm/mm measuring height.
• Axial flatness: 0.04 µm + 0.0005 µm/mm radius.
• Centering/tilting range: ± 2 mm / ± 0.6°.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Isdpfs Ak Huzsx Ah Seii
• Measurement task: Determination of form and position tolerances (e.g. circularity and flatness) as well as evaluation using software solutions such as Turbo Form.
• Workpiece alignment: Automatic centering and tilting of the workpiece (in contrast to the F1004 and F2004 variants with manual alignment).
• Air-bearing rotary axis (C-axis): Rotary table with a diameter of 250 mm, a speed of 1–10 rpm, and a 4096-point angular resolution.
Technical specifications (according to the F1004–F4004 data sheet):
• Max. measuring height: 350 mm (in practice, larger workpiece dimensions are also specified depending on the measuring setup/application).
• Max. test diameter: 380 mm.
• Max. load: 40 kg.
• Circularity deviation: 0.05 µm + 0.0005 µm/mm measuring height.
• Axial flatness: 0.04 µm + 0.0005 µm/mm radius.
• Centering/tilting range: ± 2 mm / ± 0.6°.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2020
19 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 9733 ... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है








