तीन-तरफ़ा टिपर ट्रेलरHUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
तीन-तरफ़ा टिपर ट्रेलर
HUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
VB कर के अतिरिक्त
€6,150
निर्माण वर्ष
2026
स्थिति
नई
स्थान
Nürnberg 

मूल आधारभूत जानकारी
मूल्य और स्थान
VB कर के अतिरिक्त
€6,150
- स्थान:
- Hutbergstr. 27, 90475 Nürnberg, Deutschland

कॉल करें
तकनीकी विवरण
आकार और वजन
कुल वजन:
3,000 किग्रा
खाली वजन:
940 किग्रा
अधिकतम भार वजन:
2,060 किग्रा
कुल लंबाई:
4,555 मिमी
कुल चौड़ाई:
1,910 मिमी
कुल ऊँचाई:
1,260 मिमी
लोडिंग स्पेस की लंबाई:
3,130 मिमी
लोडिंग स्पेस की चौड़ाई:
1,740 मिमी
लोडिंग स्पेस की ऊँचाई:
400 मिमी
धुरे और पहिये
धुरा विन्यास:
2 धुरे
टायर का आकार:
195/50 R13C
ब्रेक
ट्रेलर ब्रेक:
ब्रेक वाला ट्रेलर
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A23368807
- अद्यतन:
- अंतिम बार 22.11.2026 को
विवरण
Humbaur three-way tipper with electric pump and Furmann steel sideboards, hot-dip galvanized, 40 cm high, for demanding applications.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Kodpfxj Algdie Adwend
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Kodpfxj Algdie Adwend
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2011
41 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 911 9... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है


























