खराद, कापियर, स्वचालित लकड़ी का काम करने वाली मशीनINTOREX
TXA-1200
खराद, कापियर, स्वचालित लकड़ी का काम करने वाली मशीन
INTOREX
TXA-1200
स्थिर मूल्य कर के अतिरिक्त
€13,465
स्थिति
उपयोग किया हुआ
स्थान
Sierakowska Huta 

मूल आधारभूत जानकारी
- मशीन का नाम:
- खराद, कापियर, स्वचालित लकड़ी का काम करने वाली मशीन
- निर्माता:
- INTOREX
- मॉडल:
- TXA-1200
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
मूल्य और स्थान
स्थिर मूल्य कर के अतिरिक्त
€13,465
- स्थान:
- Sierakowska Huta 26, 83-340 Sierakowice, Polska

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A22574012
- संदर्भ संख्या:
- 6901
- अद्यतन:
- अंतिम बार 28.09.2026 को
विवरण
CATALOGUE NUMBER 6901
TECHNICAL DATA
- Max. turning length: 1200 mm
- Max. turning diameter: 210 mm
- Max. turning diameter with standard support: 90 mm
Crsdpfozu R S Rox Ahzjh
- Max. dimensions of square material for turning with automatic feed: 100 mm
- 3 hydraulic copying units
- Additional 3 cutting tools on hydraulic pistons (2 installed)
- 4 types of spindle speeds
- Automatic or manual machine operation
- Spindle motor: 9 kW
- Hydraulic pump motor: 3 kW
- Diameter of extraction port: 90 mm
- Dimensions for transport (L/W/H): 3700x2100x2000 mm
- Weight: approximately 3000 kg
ADVANTAGES
- Made in Italy
- Automatic hydraulic copying unit
- Original DTR documentation
- Unpainted
- Used lathe, very good condition
Net price: 57,900 PLN
Net price: 13,465 EUR
Net price calculated using an exchange rate of 4.30 PLN/EUR
(price may change in the event of significant exchange rate fluctuations)
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
TECHNICAL DATA
- Max. turning length: 1200 mm
- Max. turning diameter: 210 mm
- Max. turning diameter with standard support: 90 mm
Crsdpfozu R S Rox Ahzjh
- Max. dimensions of square material for turning with automatic feed: 100 mm
- 3 hydraulic copying units
- Additional 3 cutting tools on hydraulic pistons (2 installed)
- 4 types of spindle speeds
- Automatic or manual machine operation
- Spindle motor: 9 kW
- Hydraulic pump motor: 3 kW
- Diameter of extraction port: 90 mm
- Dimensions for transport (L/W/H): 3700x2100x2000 mm
- Weight: approximately 3000 kg
ADVANTAGES
- Made in Italy
- Automatic hydraulic copying unit
- Original DTR documentation
- Unpainted
- Used lathe, very good condition
Net price: 57,900 PLN
Net price: 13,465 EUR
Net price calculated using an exchange rate of 4.30 PLN/EUR
(price may change in the event of significant exchange rate fluctuations)
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है



































































