KBA40/11000Jansen Maschinen GmbH
KBA40/11000
KBA40/11000
Jansen Maschinen GmbH
KBA40/11000
निर्माण वर्ष
2017
स्थिति
उपयोग किया हुआ
(पूरी तरह से कार्यरत)
स्थान
Rastdorf 

मूल आधारभूत जानकारी
- मशीन का नाम:
- KBA40/11000
- निर्माता:
- Jansen Maschinen GmbH
- मॉडल:
- KBA40/11000
- मशीन नंबर:
- 17.018.011
- निर्माण वर्ष:
- 2017
- स्थिति:
- उपयोग किया हुआ
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
- स्थान:
- Rastdorf, जर्मनी

कॉल करें
तकनीकी विवरण
स्पिंडल्स
अधिकतम धुरी गति:
3,000 आरपीएम
शक्ति विवरण
इनपुट वोल्टेज:
380 V
इनपुट करेंट का प्रकार:
तीन-चरणीय
प्रलेखन और प्रमाणन
प्रलेखन / मैन्युअल
प्रक्रिया योग्य सामग्री / उत्पाद
वर्कपीस का अधिकतम वजन:
3,500 किग्रा
अक्ष विनिर्देश
X-अक्ष यात्रा दूरी:
11,000 मिमी
Y-अक्ष की यात्रा दूरी:
500 मिमी
Z-अक्ष की यात्रा दूरी:
500 मिमी
Z-अक्ष की तीव्र गति:
5 मीटर/मिनट
एक्स-अक्ष पर तेज व्रुत्ती:
20 मीटर/मिनट
Y-अक्ष त्वरित ट्रैवर्स:
10 मीटर/मिनट
अधिक विवरण
ड्रिलिंग क्षमता:
40 मिमी
घूर्णन गति अनंत रूप से परिवर्तनीय
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A23345423
- अद्यतन:
- अंतिम बार 17.11.2026 को
विवरण
The CNC drilling machine KBA 40 is a development specifically designed for craft businesses and metalworking companies. Time-consuming measuring, marking, and center-punching are no longer necessary.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
Ibsdpfxo Akrktj Abvsd
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
Ibsdpfxo Akrktj Abvsd
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
दस्तावेज़
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
अंतिम बार ऑनलाइन: आज
से पंजीकृत: 2026
2 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 5956 ... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है














