8 पीस का सेट Lenzkes K16 क्विक-क्लैम्पिंग क्लैम्प (K-Line)Lenzkes
K16 Quick Mold Clamp (K-Line)
8 पीस का सेट Lenzkes K16 क्विक-क्लैम्पिंग क्लैम्प (K-Line)
Lenzkes
K16 Quick Mold Clamp (K-Line)
स्थिति
उपयोग किया हुआ
स्थान
Trenčianske Stankovce 

मूल आधारभूत जानकारी
- निर्माता:
- Lenzkes
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
मूल्य और स्थान
- विक्रेता का स्थान:
- 3011 Sedličná, 913 11 Trenčianske Stankovce, स्लोवाकिया

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A23339780
- संदर्भ संख्या:
- 260372
- अद्यतन:
- अंतिम बार 16.11.2026 को
विवरण
Set of 8x Lenzkes K16 Quick Mold Clamp (K-Line)
These are mechanical mold clamps (quick-release clamps) by LENZKES ,
series 100-16K (with T-slot nut), designed for injection molding machines.
There are 8 pieces in total shown in the photos.
Technical Parameters (Lenzkes 100-16K)
1. Manufacturer: Lenzkes Spanntechnik GmbH (Germany)
2. Model / Type: 100-16K (casting markings on both the body and bottom T-nut: 100-16K / K16)
3. Quantity in photos: 8 pcs
4. Bolt thread: M16 (strength class 12.9, internal hexagon socket)
5. T-slot width: 16 mm (per the 16K designation – T-slot nut with self-aligning swivel joint)
6. Maximum clamping force: 45 kN (approx. 4.5 tons per clamp)
7. Tightening torque: 150 Nm
Hjdpfx Aps Akk Efjcjfp
8. Clamping height: steplessly adjustable (typically 0 – 45 mm without the need for shims/packing)
9. Application: clamping injection molds onto injection molding machine platens
These are mechanical mold clamps (quick-release clamps) by LENZKES ,
series 100-16K (with T-slot nut), designed for injection molding machines.
There are 8 pieces in total shown in the photos.
Technical Parameters (Lenzkes 100-16K)
1. Manufacturer: Lenzkes Spanntechnik GmbH (Germany)
2. Model / Type: 100-16K (casting markings on both the body and bottom T-nut: 100-16K / K16)
3. Quantity in photos: 8 pcs
4. Bolt thread: M16 (strength class 12.9, internal hexagon socket)
5. T-slot width: 16 mm (per the 16K designation – T-slot nut with self-aligning swivel joint)
6. Maximum clamping force: 45 kN (approx. 4.5 tons per clamp)
7. Tightening torque: 150 Nm
Hjdpfx Aps Akk Efjcjfp
8. Clamping height: steplessly adjustable (typically 0 – 45 mm without the need for shims/packing)
9. Application: clamping injection molds onto injection molding machine platens
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है

















