लेबल मुद्रण वितरण प्रणाली
4050S
लेबल मुद्रण वितरण प्रणाली
4050S
VB कर के अतिरिक्त
€6,650
स्थिति
उपयोग किया हुआ
स्थान
Borken 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
मूल्य और स्थान
VB कर के अतिरिक्त
€6,650
- स्थान:
- Dunkerstrasse 29, 46325 Borken/Burlo, DE
कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A7379912
- संदर्भ संख्या:
- 25075
- अद्यतन:
- अंतिम बार 11.04.2025 को
विवरण
Bluhm Weber Legi-Air- 4050S Labeling Machine
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Itedpfx Asibh Tkobdon
Bluhm Weber Legi-Air- 4050S
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Itedpfx Asibh Tkobdon
Bluhm Weber Legi-Air- 4050S
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 2862 ... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है