कार्डन शाफ्ट संतुलन मशीन

BVI-03-74

Cardan shaft balancing machine BVI-03-74
Available in stock in Poland !!!
Delivery time: one day!!!
.
.
Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks.

This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively.

.
Lodpfx Ajpbv Tfjhuehg
.
TWO TIMES faster than your machine.

This balancing machine is majored to balance the shaft not only qualitatively, but also quickly.
If you can balance in 2-2.5 times faster, then this is your real competitive advantage.
.
.

HIGH PERFORMANCE ACCESSORIES
The machine is equipped with three main types of adapters:
1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts.
THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS.
The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts.
2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts.
3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings.




KEY FEATURES
• Balancing of 2, 3 and 4-support cardan shafts
• Shaft length up to 4700mm, weight up to 150kg
• Cardan installation in 1 minute
• Standard set of adapters - Installation of 80% of cardan shafts;
• Three ways of fixing the center bearing
• Soft-bearing type machine - high sensitivity to any vibration
• Machine is operated by one worker
• Sliding bearing supports - quick changeover, comfortable operation
• Safety bracket with clamp for quick installation
• Measurement in all planes at one time
• Calibration of the machine by the operator
• Displays imbalance in real time
• Create and print reports



SPECIFICATIONS
Maximum cardan shaft weight 150 kg
Maximum flange diameter 300 mm
Maximum length of cardan shaft 4700 mm
Number of machine supports 4
Number of simultaneously measured planes 2, 3, 4
Minimum achievable residual specific imbalance, 10 g mm/kg
Rotor speed range 1000-2000 rpm
Power supply 380V, 3 Ph, 50Hz
Power, minimum, 2,2 kW
Dimensions (length x width x height) 6000 х 1100 х 1450 mm
Weight 700 kg


! We manufacture а full range of equipment
for drive shaft balancing and repair service.
Please contact us to get the best offer!