मैनुअल काटने का कार्य मशीनMacc
320 M
मैनुअल काटने का कार्य मशीन
Macc
320 M
स्थिति
नई
स्थान
Concordia Sagittaria 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
मूल्य और स्थान
- स्थान:
- Via Levada, 72, 30023 Concordia Sagittaria VE, Italia
कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A4424837
- अद्यतन:
- अंतिम बार 18.11.2024 को
विवरण
Good brand new
No. 1 available for immediate delivery!
Warranty " CE "
Made in Italy
Cutting capacity :
Hjdpfjfibfgjx Ab Njfn
0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300
45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230
60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130
TECHNICAL DATA AND STANDARD EQUIPMENT:
Vertical rotation on pivot with adjustable conical bearings without backlash.
Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw.
Appropriately sized flywheels.
Sturdy belt guides with watertight bearings and adjustable widia plates.
Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control.
Vice with rapid locking device
Safety device on the flywheel cover, on the control knob and on the blade.
Cutting thickness 1,2 mm
Cutting range from 0 to 60° right
Adjustable stop for cuts of the same size
Low voltage system 24 V
0.06 kW electric pump for belt cooling
The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
No. 1 available for immediate delivery!
Warranty " CE "
Made in Italy
Cutting capacity :
Hjdpfjfibfgjx Ab Njfn
0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300
45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230
60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130
TECHNICAL DATA AND STANDARD EQUIPMENT:
Vertical rotation on pivot with adjustable conical bearings without backlash.
Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw.
Appropriately sized flywheels.
Sturdy belt guides with watertight bearings and adjustable widia plates.
Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control.
Vice with rapid locking device
Safety device on the flywheel cover, on the control knob and on the blade.
Cutting thickness 1,2 mm
Cutting range from 0 to 60° right
Adjustable stop for cuts of the same size
Low voltage system 24 V
0.06 kW electric pump for belt cooling
The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2016
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+39 0421 ... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है