सीएनसी मोड़-मिलिंग केंद्रMazak
Integrex 300 SY
सीएनसी मोड़-मिलिंग केंद्र
Mazak
Integrex 300 SY
निर्माण वर्ष
2000
स्थिति
उपयोग किया हुआ
स्थान
Schwabach 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- सीएनसी मोड़-मिलिंग केंद्र
- निर्माता:
- Mazak
- मॉडल:
- Integrex 300 SY
- निर्माण वर्ष:
- 2000
- स्थिति:
- अच्छी स्थिति (इस्तेमाल किया हुआ)
- कार्यक्षमता:
- पूरी तरह से कार्यरत
- प्रचालन घंटे:
- 10,000 h
मूल्य और स्थान
- स्थान:
- Banater Straße 5, 91126 Schwabach, Deutschland

कॉल करें
तकनीकी विवरण
- टर्निंग लंबाई:
- 1,105 मिमी
- टर्निंग व्यास:
- 610 मिमी
- अधिकतम धुरी गति:
- 3,500 आरपीएम
- स्पिंडल छिद्र:
- 70 मिमी
- X-अक्ष यात्रा दूरी:
- 580 मिमी
- Y-अक्ष की यात्रा दूरी:
- 210 मिमी
- Z-अक्ष की यात्रा दूरी:
- 1,137 मिमी
- माउंट व्यास:
- 63 मिमी
- अधिकतम घूर्णन गति:
- 6,000 आरपीएम
- इनपुट करेंट का प्रकार:
- एसी
- उपकरण:
- घूर्णन गति अनंत रूप से परिवर्तनीय
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A20342080
- अद्यतन:
- अंतिम बार 21.10.2025 को
विवरण
The machine is in good condition.
Major maintenance work in recent years:
30.04.2020: Milling spindle overhauled CHF 35,000
16.07.2021: Software update (Wenk AG) CHF 1,600
20.06.2022: Central lubrication pump replaced CHF 400
(All prices are in CHF)
Known issues:
- Error message during startup
- Coolant from internal cooling leaks out at the rear of the milling spindle
- Overload message when the machine is cold and running at 100% rapid traverse
- Over 150 different tool holders included
- Spare magazine sleeves for tool magazine
- Spare limit switches for tool changer position monitoring
- 2 x 3-jaw chuck diameter 250 mm (mounted for inspection)
- 1 x 3-jaw chuck diameter 250 mm
- 1 x 3-jaw chuck diameter 300 mm
- 1 x 4-jaw chuck diameter 400 mm
- 2 sets of hard jaws for external clamping, short version
- 1 set of hard jaws for external clamping, long version
- Various sets of used soft jaws
- Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25)
- Coolant cleaning system or oil separator (custom built)
- Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions
- Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping
- Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width
- Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm)
- Cleaning/deburring brush suitable for a holder
Kjdpsxp Hmasfx Ab Eell
We are also happy to provide leasing and financing offers for the machine.
A viewing appointment can be arranged upon request.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Major maintenance work in recent years:
30.04.2020: Milling spindle overhauled CHF 35,000
16.07.2021: Software update (Wenk AG) CHF 1,600
20.06.2022: Central lubrication pump replaced CHF 400
(All prices are in CHF)
Known issues:
- Error message during startup
- Coolant from internal cooling leaks out at the rear of the milling spindle
- Overload message when the machine is cold and running at 100% rapid traverse
- Over 150 different tool holders included
- Spare magazine sleeves for tool magazine
- Spare limit switches for tool changer position monitoring
- 2 x 3-jaw chuck diameter 250 mm (mounted for inspection)
- 1 x 3-jaw chuck diameter 250 mm
- 1 x 3-jaw chuck diameter 300 mm
- 1 x 4-jaw chuck diameter 400 mm
- 2 sets of hard jaws for external clamping, short version
- 1 set of hard jaws for external clamping, long version
- Various sets of used soft jaws
- Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25)
- Coolant cleaning system or oil separator (custom built)
- Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions
- Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping
- Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width
- Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm)
- Cleaning/deburring brush suitable for a holder
Kjdpsxp Hmasfx Ab Eell
We are also happy to provide leasing and financing offers for the machine.
A viewing appointment can be arranged upon request.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 9122 ... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
छोटा विज्ञापन
Oelde
6,920 km
मशीनिंग सेंटर - यूनिवर्सल
DECKEL MAHODMC 100 U duoBLOCK
DECKEL MAHODMC 100 U duoBLOCK
छोटा विज्ञापन
जर्मनी
6,760 km
सीएनसी मशीनिंग केंद्र
MazakFH 6800
MazakFH 6800
छोटा विज्ञापन
Gussago
6,767 km
ग्राजियानो (DMG) GT300 CNC Y + सब (जैसे CTX300)
Graziano (DMG)GT300 CNC Y + Sub (like CTX300)
Graziano (DMG)GT300 CNC Y + Sub (like CTX300)
छोटा विज्ञापन
București
5,507 km
तख़्ता पीसने की मशीन
KappRS 2003
KappRS 2003
छोटा विज्ञापन
Mindelheim
6,742 km
स्विस-प्रकार खराद
GildemeisterGD 32-5A
GildemeisterGD 32-5A
छोटा विज्ञापन
Ennepetal
6,978 km
मशीनी केंद्र
MATRA JOHNFORDDMC-2100H
MATRA JOHNFORDDMC-2100H
छोटा विज्ञापन
Wasbek
6,816 km
पारंपरिक खराद मशीन - Sinus 400/1500 D
KnuthSinus 400/1500 D
KnuthSinus 400/1500 D
छोटा विज्ञापन
Iserlohn
6,958 km
सीएनसी 4 अक्ष
NIKKENCNC -200
NIKKENCNC -200
छोटा विज्ञापन
Wiesbaden
6,914 km
ऊर्ध्वाधर मशीनिंग केन्द्र
MAZAKVQC-15
MAZAKVQC-15
छोटा विज्ञापन
Burgoberbach
6,740 km
यूनिवर्सल मशीनिंग सेंटर
MikronVCE 600 PRO BJ 2012
MikronVCE 600 PRO BJ 2012
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है
















































































