सैंडब्लास्टिंग इकाईPlastik-Maschinenbau GmbH
सैंडब्लास्टिंग इकाई
Plastik-Maschinenbau GmbH
VB कर के अतिरिक्त
€3,000
स्थिति
उपयोग किया हुआ
स्थान
स्लोवाकिया 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- सैंडब्लास्टिंग इकाई
- निर्माता:
- Plastik-Maschinenbau GmbH
- स्थिति:
- अच्छी स्थिति (इस्तेमाल किया हुआ)
मूल्य और स्थान
VB कर के अतिरिक्त
€3,000
- स्थान:
- Nitrianska 59, 942 01 Šurany, SK

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A20472605
- अद्यतन:
- अंतिम बार 06.11.2025 को
विवरण
Manufacturer: Plastik-Maschinenbau GmbH (PM)
Chsdexu E E Sspfx Abped
Model: PM Wiska 30-25 D
Serial No.: M0793
Made in: West Germany (Kelberg / Eifel)
Type: Single-screw plastic extruder
Documentation: Included (original German manual and correspondence from 1987)
Condition: Used, but complete and fully functional
Location: Ivanka pri Nitre, Slovakia
Technical Details (approximate)
Screw diameter: 30 mm
L/D ratio: 25 D
Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm)
Power supply: 3 × 380–420 V / 50 Hz
Control voltage: 220 V
Cooling system: Air-cooled barrel with heating zones
Control cabinet: Included, equipped with relays, circuit breakers, and analog meters
Description
Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Chsdexu E E Sspfx Abped
Model: PM Wiska 30-25 D
Serial No.: M0793
Made in: West Germany (Kelberg / Eifel)
Type: Single-screw plastic extruder
Documentation: Included (original German manual and correspondence from 1987)
Condition: Used, but complete and fully functional
Location: Ivanka pri Nitre, Slovakia
Technical Details (approximate)
Screw diameter: 30 mm
L/D ratio: 25 D
Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm)
Power supply: 3 × 380–420 V / 50 Hz
Control voltage: 220 V
Cooling system: Air-cooled barrel with heating zones
Control cabinet: Included, equipped with relays, circuit breakers, and analog meters
Description
Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2025
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+421 905 ... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है




























