फोल्डिंग मशीन, कैंटिंग बेंच, बेंडिंग मशीनProd-Masz Abkantbank24 Biegemaschine
Abkantbank 2,5m/0.8
फोल्डिंग मशीन, कैंटिंग बेंच, बेंडिंग मशीन
Prod-Masz Abkantbank24 Biegemaschine
Abkantbank 2,5m/0.8
स्थिर मूल्य एमडब्ल्यूएसटी को अलग से नहीं दिखाया जा सकता
€1,600
निर्माण वर्ष
2025
स्थिति
नई
स्थान
जर्मनी 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- फोल्डिंग मशीन, कैंटिंग बेंच, बेंडिंग मशीन
- निर्माता:
- Prod-Masz Abkantbank24 Biegemaschine
- मॉडल:
- Abkantbank 2,5m/0.8
- निर्माण वर्ष:
- 2025
- स्थिति:
- नया
मूल्य और स्थान
स्थिर मूल्य एमडब्ल्यूएसटी को अलग से नहीं दिखाया जा सकता
€1,600
- स्थान:
- Niemcy
कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A3000438
- अद्यतन:
- अंतिम बार 27.01.2025 को
विवरण
Bending machine PROD-MASZ to the plate ZGR 2640.-0.8 is a sensational machine for precision bending of all types of metal sheets
(steel 0.8mm, titanium zinc 0.8mm, aluminum of 1.2 mm, copper sheet 0.65 mm).
Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms.
Each part of the machine is adjustable, which allows for adjustment of the arc bending.
Crjdpjc Nwd Aofx Aa Eoh
Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending.
Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration.
Proper execution of these connections certainly prolong the life of the roof.
By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard.
(steel 0.8mm, titanium zinc 0.8mm, aluminum of 1.2 mm, copper sheet 0.65 mm).
Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms.
Each part of the machine is adjustable, which allows for adjustment of the arc bending.
Crjdpjc Nwd Aofx Aa Eoh
Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending.
Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration.
Proper execution of these connections certainly prolong the life of the roof.
By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard.
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+48 52 30... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है