X45 स्वचालित एल्युमीनियम अप-कट आरीProfiFeed Technologies
x45 Semi-Automatic Aluminium Saw
X45 स्वचालित एल्युमीनियम अप-कट आरी
ProfiFeed Technologies
x45 Semi-Automatic Aluminium Saw
निर्माण वर्ष
2026
स्थिति
नई
स्थान
Kruševac 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- X45 स्वचालित एल्युमीनियम अप-कट आरी
- निर्माता:
- ProfiFeed Technologies
- निर्माण वर्ष:
- 2026
- स्थिति:
- नया
मूल्य और स्थान
- स्थान:
- Majke Jugovica 25A, 37000 Krusevac, Srbija

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A18679876
- अद्यतन:
- अंतिम बार 05.01.2026 को
विवरण
Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw.
X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance.
Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws.
• Ø450 mm TCT saw blade with powerful 3.0 kW drive motor
• Ergonomic usage design with blade changed from the front of the machine
• AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation
• Overhead safety guards with safety tunnels 900 mm each side of the saw
• Safety guard liftable on a press of a button for unimpeded saw table access
• Safety switch disabling the saw operation on guard up
• Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down.
• Safety switch detection of opening of the access panels triggering an e-stop.
• 2× vertical and 2× horizontal clamps with adjustable clamp pressures.
• Adjustable saw mitre angle to ±85°
• Moveable back fence for increased cutting capacity
• Spray-mist blade lubrication system
• Air gun and LED interior light
• 2× Ø100 mm points for chip collection
Kjdpsv Iccfefx Ah Hjww
• Optional 3.8 kW vacuum chip extractor
X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance.
Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws.
• Ø450 mm TCT saw blade with powerful 3.0 kW drive motor
• Ergonomic usage design with blade changed from the front of the machine
• AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation
• Overhead safety guards with safety tunnels 900 mm each side of the saw
• Safety guard liftable on a press of a button for unimpeded saw table access
• Safety switch disabling the saw operation on guard up
• Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down.
• Safety switch detection of opening of the access panels triggering an e-stop.
• 2× vertical and 2× horizontal clamps with adjustable clamp pressures.
• Adjustable saw mitre angle to ±85°
• Moveable back fence for increased cutting capacity
• Spray-mist blade lubrication system
• Air gun and LED interior light
• 2× Ø100 mm points for chip collection
Kjdpsv Iccfefx Ah Hjww
• Optional 3.8 kW vacuum chip extractor
दस्तावेज़
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2020
145 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+381 37 2... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
छोटा विज्ञापन
Berlin
6,569 km
पिक-अप वैन
PEUGEOTBoxer Euro 5 3,80m
PEUGEOTBoxer Euro 5 3,80m
छोटा विज्ञापन
Petrovče
6,380 km
बहुत तकलीफ
Robust¸Reuser SD 700/22 kW
Robust¸Reuser SD 700/22 kW
छोटा विज्ञापन
Enschede
7,014 km
कार्यशाला प्रेस के लिए झुकने वाला उपकरण
AYEL-TECH710
AYEL-TECH710
छोटा विज्ञापन
Concordia Sagittaria
6,559 km
तीन चरण बैंड देखा
NEBESTM 275
NEBESTM 275
छोटा विज्ञापन
Hövelhof
6,884 km
हाइड्रॉलिक प्रेस
HYDRAPHKPS8000
HYDRAPHKPS8000
छोटा विज्ञापन
Kruševac
5,871 km
पूर्णतः स्वचालित ऑप्टिमाइज़र सॉ 3m
ProfiFeed TechnologiesA550 Fully Automatic Mitre Aluminium Saw
ProfiFeed TechnologiesA550 Fully Automatic Mitre Aluminium Saw
छोटा विज्ञापन
Kruševac
5,871 km
पूर्णतः स्वचालित ऑप्टिमाइज़र सॉ 6 मी
ProfiFeed TechnologiesA550 Fully Automatic Mitre Aluminium Saw
ProfiFeed TechnologiesA550 Fully Automatic Mitre Aluminium Saw
छोटा विज्ञापन
Enschede
7,009 km
हल्की धातु/एल्यूमीनियम गोलाकार आरी
TUGRAAC-400
TUGRAAC-400
छोटा विज्ञापन
Kassel
6,827 km
खेतिहर
AmazoneKG 6002-2 -Cultimix-
AmazoneKG 6002-2 -Cultimix-
छोटा विज्ञापन
Kassel
6,827 km
अन्य उपकरण
AmazonePrimera DMC 3000
AmazonePrimera DMC 3000
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है



















































































