ब्रोचिंग मशीन

Rausch Räummaschine RS 6 G

Manufacturer: Rausch (Haan/Rhld)
Model: RS 6/1000
Machine No.: 51261
Rsdpfx Ajw Ighioiyoch
Year of Manufacture: 1978
Weight: 680 kg
Overhauled: 11/2024 by Wiemers AG

General Information / Technical Data:
Overhauled mechanical vertical broaching machine Rausch RS 6 G
Pulling force: 60 kN
Broaching speeds: 3 m/min and 6 m/min
Return speed: 6 m/min
Maximum stroke: 1000 mm
Maximum tool length: 1200 mm
Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm
Table aperture: Ø90 mm for standard broaching mandrels
Workpiece diameter: unlimited
Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments)
Motor: 4.4 kW / 5.5 kW
Power supply: 400 Volt / 50 Hz

Additional modifications/upgrades to the original machine performed:

- External stroke adjustment
- New, machine-independent, reproducible tool length adjustment system
- Additional limit switches for end position monitoring
- Safety door with monitoring (integrated in the emergency circuit)
- Machine enclosure below safety door with chip protection and tool storage area
- Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge)
- Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!)
- Routing of electrical cables in protective steel conduits
- Heavy-duty control cabinet mounting for machine components
- Additional oil-proof drip tray on the control cabinet
- Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm)
- Reinforced chip screen with magnetic separator
- Control panel made of stainless steel with durable labeling
- 4 central lubrication points for trapezoidal spindle drive

Remarks:
The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced.
- New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze
- All bearings and seals renewed
- The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new
- The clamping jaws are new
- Complete electrical system (control cabinet) is new
- All sheet metal and enclosures are new
- The following components have been overhauled and re-used:
- Machine base
- Machine column
- Machine table with table insert
- Broaching bridge (clamping jaws new)
- Gear wheels
- Electric motor (new brake, new bearings)

The machine is stored in our warehouse and can be inspected under power.
The attached images are original photos of the machine.
The machine is CE marked.
The CE marking corresponds to the status as of 1998 (first overhaul).

इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।