क्रिम्पिंग और फोल्डिंग मशीनSchechtl
MAF 400/CNC
क्रिम्पिंग और फोल्डिंग मशीन
Schechtl
MAF 400/CNC
निर्माण वर्ष
2026
स्थिति
नई
स्थान
Kalina Wielka 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- क्रिम्पिंग और फोल्डिंग मशीन
- निर्माता:
- Schechtl
- मॉडल:
- MAF 400/CNC
- निर्माण वर्ष:
- 2026
- स्थिति:
- नया
मूल्य और स्थान
- स्थान:
- Kalina Wielka 62 E, 32-218 Kalina Wielka, Polska

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A20762817
- अद्यतन:
- अंतिम बार 15.12.2025 को
विवरण
Efficient, quiet, and powerful mechanical machine
Technical specifications:
Working length: 4040 mm
Total length: 5352 mm
Depth: 2232 mm
Working height: 950 mm
Total height: 1924 mm
Weight: 5,000 kg
Maximum bending thicknesses:
Ppedpfox Hyhbjx Aahjl
Steel: 1.5 mm
Aluminum: 2.00 mm
Stainless steel: 1.00 mm
Copper: 2.00 mm
Galvanized sheet: 3.00 mm
Standard equipment:
• 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam
• 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam
• Foot switch (MAF 400/CNC model delivered with a second foot switch)
• Soft start for the bending beam
• Electrically driven back gauge, 8-1000 mm
• 5 m power cable with 32 A mains plug (EU version)
• Supply voltage: 3 x 400 V, 50 Hz (EU version)
CNC S-Touch control:
From profile concept to bending precision in record time
Standard features at no extra charge:
• Graphical display of the bending sequence for the selected program
• Graphical representation of sheet position before every bend
• Operator guidance – each work step visually explained via the graphic control system
• Programming without submenus
• Profile correction by direct touch in the desired section of the profile
• Programmable angle correction
• Set repeat cycles for special radius arcs
• Cutting program for RSL rotary shears
• Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges
• Profile search possible by name, sketch selection, and profile drawing on the touchscreen
• 21.5-inch LCD touchscreen with best-in-class graphics
• USB port for program backup and transfer
• Non-volatile memory for over 3,000 programs
• Freely assignable program names (profile names)
• Registration of produced quantities and machine operating time
• 16 languages
• Remote support (Team Viewer)
• Soft start for bending beam
• Back gauge with drive, 6-1000 mm
• Foot switch
For EU market:
• 16 A plug with 5 m power cable
• For MAF and MAZ models, 32 A plug with 5 m power cable
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Technical specifications:
Working length: 4040 mm
Total length: 5352 mm
Depth: 2232 mm
Working height: 950 mm
Total height: 1924 mm
Weight: 5,000 kg
Maximum bending thicknesses:
Ppedpfox Hyhbjx Aahjl
Steel: 1.5 mm
Aluminum: 2.00 mm
Stainless steel: 1.00 mm
Copper: 2.00 mm
Galvanized sheet: 3.00 mm
Standard equipment:
• 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam
• 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam
• Foot switch (MAF 400/CNC model delivered with a second foot switch)
• Soft start for the bending beam
• Electrically driven back gauge, 8-1000 mm
• 5 m power cable with 32 A mains plug (EU version)
• Supply voltage: 3 x 400 V, 50 Hz (EU version)
CNC S-Touch control:
From profile concept to bending precision in record time
Standard features at no extra charge:
• Graphical display of the bending sequence for the selected program
• Graphical representation of sheet position before every bend
• Operator guidance – each work step visually explained via the graphic control system
• Programming without submenus
• Profile correction by direct touch in the desired section of the profile
• Programmable angle correction
• Set repeat cycles for special radius arcs
• Cutting program for RSL rotary shears
• Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges
• Profile search possible by name, sketch selection, and profile drawing on the touchscreen
• 21.5-inch LCD touchscreen with best-in-class graphics
• USB port for program backup and transfer
• Non-volatile memory for over 3,000 programs
• Freely assignable program names (profile names)
• Registration of produced quantities and machine operating time
• 16 languages
• Remote support (Team Viewer)
• Soft start for bending beam
• Back gauge with drive, 6-1000 mm
• Foot switch
For EU market:
• 16 A plug with 5 m power cable
• For MAF and MAZ models, 32 A plug with 5 m power cable
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2023
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+48 667 6... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
छोटा विज्ञापन
Wasbek
6,816 km
स्विवेल बेंडिंग मशीन - SBS 1020/2,5
KnuthSBS 1020/2,5
KnuthSBS 1020/2,5
छोटा विज्ञापन
Velen
7,005 km
Flanging और सीवन रोलिंग मशीन
OSTASKMRP-1,2
OSTASKMRP-1,2
छोटा विज्ञापन
Eislingen/Fils
6,803 km
अनुभाग कतरनी - संयुक्त
PEDDINGHAUS210/13
PEDDINGHAUS210/13
छोटा विज्ञापन
Velen
7,005 km
बीडिंग और फ्लैंगिंग मशीन
WMTRM 8
WMTRM 8
छोटा विज्ञापन
Vilniaus miesto savivaldybė
5,858 km
शीट मेटल फोल्डर
SchröderMAKU 3200
SchröderMAKU 3200
छोटा विज्ञापन
Kalina Wielka
6,071 km
क्रिम्पिंग और फ़्लैंगिंग मशीन
SchechtlMBM 310 ETC
SchechtlMBM 310 ETC
छोटा विज्ञापन
Trittau
6,782 km
शीट मेटल फोल्डर
SchechtlMAX 200 / STD
SchechtlMAX 200 / STD
छोटा विज्ञापन
Güntersleben
6,792 km
कैंची और तह बेंच
SchechtlHT KS 150
SchechtlHT KS 150
छोटा विज्ञापन
Heilbronn
6,840 km
फोल्डिंग बेंच, बेंडिंग मशीन, फोल्डिंग बेंच
PROD-MASZ Abkantbank24 BiegemaschineProfi Abkantbank RED-3m/0.8 +Aussparung
PROD-MASZ Abkantbank24 BiegemaschineProfi Abkantbank RED-3m/0.8 +Aussparung
छोटा विज्ञापन
Wellingborough
7,524 km
शीट मेटल फोल्डर
SCHRODERPOWERBEND PROFESSIONAL 3200/3.0
SCHRODERPOWERBEND PROFESSIONAL 3200/3.0
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है













































































