V2A से बना 15,000 लीटर गर्म करने योग्य/ठंडा करने योग्य दबाव पात्रSchmidding Werke
8162
V2A से बना 15,000 लीटर गर्म करने योग्य/ठंडा करने योग्य दबाव पात्र
Schmidding Werke
8162
स्थिर मूल्य कर के अतिरिक्त
€11,450
स्थिति
उपयोग किया हुआ
स्थान
Bremen 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
मूल्य और स्थान
स्थिर मूल्य कर के अतिरिक्त
€11,450
- स्थान:
- Bremen
कॉल करें
तकनीकी विवरण
- टैंक क्षमता:
- 15,000 l
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A20351365
- संदर्भ संख्या:
- 8162
- अद्यतन:
- अंतिम बार 23.10.2025 को
विवरण
Location: Bremen
Condition: used
Capacity: 15,000 liters
Max. overpressure: 1.0 bar
Tank
Max. operating temperature tank / °C: 25°C
Design: vertical
Tank
Support: feet
Number of feet: 3 units
Heating/cooling: available
Double jacket volume: 30.0 liters
Max. permissible operating overpressure: 2.0 bar
Max. permissible operating temperature: 3°C
Cylinder tempering: half-pipe coil
Internal diameter: 2,200 mm
Lodsxqcpgopfx Abdeah
Cylindrical height: 3,360 mm
Total height: 5,900 mm
Technical data / dimensions
Bottom wall thickness: 3.4 mm
Cylinder wall thickness: 3.5 mm
Equipment
Manhole / dome: in the cylinder (approx. 350 x 450 mm)
Nameplate:
Equipment: spray head
Equipment
Outlet: DN80 DIN 11851
Note: slight residues
Remarks: Bracing between the feet made of mild steel (see photos)
Previous use: brewery
Product-contact material: V2A 1.4301 (AISI 304)
Material properties
Foot material: stainless steel
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Condition: used
Capacity: 15,000 liters
Max. overpressure: 1.0 bar
Tank
Max. operating temperature tank / °C: 25°C
Design: vertical
Tank
Support: feet
Number of feet: 3 units
Heating/cooling: available
Double jacket volume: 30.0 liters
Max. permissible operating overpressure: 2.0 bar
Max. permissible operating temperature: 3°C
Cylinder tempering: half-pipe coil
Internal diameter: 2,200 mm
Lodsxqcpgopfx Abdeah
Cylindrical height: 3,360 mm
Total height: 5,900 mm
Technical data / dimensions
Bottom wall thickness: 3.4 mm
Cylinder wall thickness: 3.5 mm
Equipment
Manhole / dome: in the cylinder (approx. 350 x 450 mm)
Nameplate:
Equipment: spray head
Equipment
Outlet: DN80 DIN 11851
Note: slight residues
Remarks: Bracing between the feet made of mild steel (see photos)
Previous use: brewery
Product-contact material: V2A 1.4301 (AISI 304)
Material properties
Foot material: stainless steel
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2019
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 421 5... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है