पार्केट उत्पादन लाइनSelect_Unigripper_Meler_CSP
2 laags parket lijminstallatie
पार्केट उत्पादन लाइन
Select_Unigripper_Meler_CSP
2 laags parket lijminstallatie
स्थिर मूल्य कर के अतिरिक्त
€22,500
निर्माण वर्ष
2016
स्थिति
उपयोग किया हुआ
(पूरी तरह से कार्यरत)
स्थान
Heeswijk Dinther 

मूल आधारभूत जानकारी
- मशीन का नाम:
- पार्केट उत्पादन लाइन
- निर्माता:
- Select_Unigripper_Meler_CSP
- मशीन नंबर:
- 1
- निर्माण वर्ष:
- 2016
- स्थिति:
- उपयोग किया हुआ
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
स्थिर मूल्य कर के अतिरिक्त
€22,500
- स्थान:
- Heeswijk Dinther, नीदरलैंड

कॉल करें
तकनीकी विवरण
शक्ति विवरण
इनपुट करेंट का प्रकार:
तीन-चरणीय
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A22945826
- अद्यतन:
- अंतिम बार 11.10.2026 को
विवरण
Machine components:
1. End-jointing machine
a. Infeed frame with 2x 2018 “Unigripper” Pneutec 38960 vacuum lifting bar 100x8 cm
b. Infeed roller conveyor with grippers
c. “Meler” B4 VS glue melting unit
d. Crosscut saw Ø 300 mm and 2004
2. Parquet gluing machine
a. Buffer
b. Glue roller
c. Stacking mechanism
d. Capacity: width of 100 mm - 300 mm, length up to 3000 mm, and thickness of 9 - 12 - 15 mm
e. Traverse carriage
3. Glue presses
Option 1: Crosscutting to pre-set lengths
In the end-jointing machine, pre-cut plywood strips are placed in a buffer using vacuum bars. A strip is fed from the buffer along a hot melt glue head. Hot melt glue is applied, and the strip is pressed against the tail of the preceding strip. The end/tail-jointed strips are crosscut to pre-set lengths. The crosscut strips are fed through and coated with PVAc glue using a glue roller. (If there is no operator request, the buffer is filled.) The glued plywood strip is manually or automatically pushed onto the stack. A top layer is then placed on the glue. A stack is formed with a maximum height of 60 cm. (For varying lengths, spacers are placed between the different lengths.) Using the traverse carriage, the stack is moved in front of one of the six presses. The stack is pushed into the press, and using the conveyor belt, the stack is guided into the press. The stack can now be pressed. Using the switch, the press beam moves down, and using the rotary knob, the pressing force can be adjusted.
Option 2: Gluing to standard lengths without crosscutting
Using a separate computer program, the machine can also operate without end-jointing. When the length of the top layer and the length of the plywood match, the end-jointing can be disabled. The operation of the machine is then the same as in Option 1, but no glue is applied at the end, and the strips are not crosscut by the saw.
Fpodez Rkbcspfx Anyjn
Last modification to the machine: 2018
YouTube video:
shorts/VhgYFOVvSfY?feature=share
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
1. End-jointing machine
a. Infeed frame with 2x 2018 “Unigripper” Pneutec 38960 vacuum lifting bar 100x8 cm
b. Infeed roller conveyor with grippers
c. “Meler” B4 VS glue melting unit
d. Crosscut saw Ø 300 mm and 2004
2. Parquet gluing machine
a. Buffer
b. Glue roller
c. Stacking mechanism
d. Capacity: width of 100 mm - 300 mm, length up to 3000 mm, and thickness of 9 - 12 - 15 mm
e. Traverse carriage
3. Glue presses
Option 1: Crosscutting to pre-set lengths
In the end-jointing machine, pre-cut plywood strips are placed in a buffer using vacuum bars. A strip is fed from the buffer along a hot melt glue head. Hot melt glue is applied, and the strip is pressed against the tail of the preceding strip. The end/tail-jointed strips are crosscut to pre-set lengths. The crosscut strips are fed through and coated with PVAc glue using a glue roller. (If there is no operator request, the buffer is filled.) The glued plywood strip is manually or automatically pushed onto the stack. A top layer is then placed on the glue. A stack is formed with a maximum height of 60 cm. (For varying lengths, spacers are placed between the different lengths.) Using the traverse carriage, the stack is moved in front of one of the six presses. The stack is pushed into the press, and using the conveyor belt, the stack is guided into the press. The stack can now be pressed. Using the switch, the press beam moves down, and using the rotary knob, the pressing force can be adjusted.
Option 2: Gluing to standard lengths without crosscutting
Using a separate computer program, the machine can also operate without end-jointing. When the length of the top layer and the length of the plywood match, the end-jointing can be disabled. The operation of the machine is then the same as in Option 1, but no glue is applied at the end, and the strips are not crosscut by the saw.
Fpodez Rkbcspfx Anyjn
Last modification to the machine: 2018
YouTube video:
shorts/VhgYFOVvSfY?feature=share
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
अंतिम बार ऑनलाइन: कल
से पंजीकृत: 2025
3 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+31 6 510... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है









































