स्पॉट वेल्डिंग मशीनTECNA
PSM 4666
स्पॉट वेल्डिंग मशीन
TECNA
PSM 4666
VB कर के अतिरिक्त
€8,800
निर्माण वर्ष
2022
स्थिति
प्रदर्शनी मशीन
स्थान
Dresden 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- स्पॉट वेल्डिंग मशीन
- निर्माता:
- TECNA
- मॉडल:
- PSM 4666
- निर्माण वर्ष:
- 2022
- स्थिति:
- लगभग नई (प्रदर्शन मशीन)
मूल्य और स्थान
VB कर के अतिरिक्त
€8,800
- स्थान:
- Tübinger Str. 7, 01189 Dresden, Deutschland

- किराया:
- संभव है
कॉल करें
तकनीकी विवरण
- गर्भ गहराई:
- 400 मिमी
- 50% शुल्क चक्र पर नाममात्र शक्ति:
- 50 केवीए
- इनपुट वोल्टेज:
- 400 V
- शीतलन प्रकार:
- पानी
- समामान्य शक्ति (प्रतीत):
- 14 केवीए
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A7206015
- अद्यतन:
- अंतिम बार 22.10.2025 को
विवरण
Spot Welding Machine Type 4666 TECNA – suitable for welding nuts and sheet metal – lightly used – fully overhauled and tested.
Rated voltage: 400V
Rated power: 50kVA at 50% duty cycle
Short-circuit current: 17kA
Welding current: 13.6kA
Fuse protection: 100A
Ksdpfjh N Sd Uox Ag Aend
Connection cable L=3m mounted on machine
Throat depth: 400mm
Electrode force: 470daN
Cylinder with pre-stroke
Total stroke: 100mm
Electrode taper: MK2
Weight: approx. 400kg
- TE101 with digital welding current display, current ramp-up, etc.
- Main switch on control cabinet
- Original documentation / operating manual available
- Machine inspection with certificate valid until 08/2025
Demonstration and inspection possible by appointment.
Commissioning and operator training on site at customer location available at additional cost.
Machine is located in Dresden, near A17.
A suitable cooling unit is also in stock – additional price EUR 1,800,-.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Rated voltage: 400V
Rated power: 50kVA at 50% duty cycle
Short-circuit current: 17kA
Welding current: 13.6kA
Fuse protection: 100A
Ksdpfjh N Sd Uox Ag Aend
Connection cable L=3m mounted on machine
Throat depth: 400mm
Electrode force: 470daN
Cylinder with pre-stroke
Total stroke: 100mm
Electrode taper: MK2
Weight: approx. 400kg
- TE101 with digital welding current display, current ramp-up, etc.
- Main switch on control cabinet
- Original documentation / operating manual available
- Machine inspection with certificate valid until 08/2025
Demonstration and inspection possible by appointment.
Commissioning and operator training on site at customer location available at additional cost.
Machine is located in Dresden, near A17.
A suitable cooling unit is also in stock – additional price EUR 1,800,-.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
दस्तावेज़
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2022
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 351 8... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है
















