थर्मल शॉक टेस्ट चैम्बर -70-220°CVötsch
VT 7012 S2
थर्मल शॉक टेस्ट चैम्बर -70-220°C
Vötsch
VT 7012 S2
VB कर के अतिरिक्त
€11,025
निर्माण वर्ष
2000
स्थिति
उपयोग किया हुआ
स्थान
Borken 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- थर्मल शॉक टेस्ट चैम्बर -70-220°C
- निर्माता:
- Vötsch
- मॉडल:
- VT 7012 S2
- निर्माण वर्ष:
- 2000
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
- प्रचालन घंटे:
- 1,04,382 h
मूल्य और स्थान
VB कर के अतिरिक्त
€11,025
- स्थान:
- Dunkerstrasse 29, 46325 Borken/Burlo, Deutschland

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A20729167
- संदर्भ संख्या:
- 31747
- अद्यतन:
- अंतिम बार 10.12.2025 को
विवरण
Vötsch Shock Test Chamber VT 7012 S2
System for extreme temperature cycling
Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature.
The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads.
These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen.
Vertical arrangement of the test chambers
Ball screw drive for safe guidance of the car
Cart load capacity 50 kg for VT3 7012 S2
All-around grilles in the car secure the test specimens
High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber
Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit
Minimal energy consumption
No compressed air required
Manufacturer: Vötsch
Type: VT 7012 S2
Type: Temperature shock test chamber
Test chamber volume: 120 l
Nominal voltage: 400 V
Nominal power: 10 kW
Dwodpfxex Exmtj Afaef
Nominal current: 25 A
Refrigerant: R452A
Cooling unit: Water-cooled
Shock cooling (nitrogen cooling) via customer-supplied nitrogen
External dimensions
Width: 930 mm
Depth: 2115 mm
Height: 1970 mm
Test chamber dimensions
Width: 470 mm
Depth: 650 mm
Height: 410 mm
Protection class
Device: IP 42
Operating panel: IP 20
Control cabinet: IP 54
Temperature test parameters for single-chamber operation |
Test chamber dimensions
Width: 470 mm
Depth: 650 mm
Height: 410 mm
Protection class ...Temperatur Temperature range
Hot chamber: +50°C to +220°C
Cold chamber: -70°C to +70°C
Temperature deviation over time: ±2 K
in steady state
Temperature deviation over space: ±2 K
in steady state in the car
Heating rate, hot chamber: 11 K/min
Cooling rate, cold chamber: K/min
Heating rate, cold chamber: 2 K/min
Cooling rate, hot chamber: K/min
Observation window: 355 x 355 mm
Pipe opening: 67 mm
Year of manufacture: 2000
Operating hours: 104,382
Weight: 1000 kg
Further items – new and used – can be found in our shop! International shipping costs on request!
System for extreme temperature cycling
Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature.
The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads.
These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen.
Vertical arrangement of the test chambers
Ball screw drive for safe guidance of the car
Cart load capacity 50 kg for VT3 7012 S2
All-around grilles in the car secure the test specimens
High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber
Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit
Minimal energy consumption
No compressed air required
Manufacturer: Vötsch
Type: VT 7012 S2
Type: Temperature shock test chamber
Test chamber volume: 120 l
Nominal voltage: 400 V
Nominal power: 10 kW
Dwodpfxex Exmtj Afaef
Nominal current: 25 A
Refrigerant: R452A
Cooling unit: Water-cooled
Shock cooling (nitrogen cooling) via customer-supplied nitrogen
External dimensions
Width: 930 mm
Depth: 2115 mm
Height: 1970 mm
Test chamber dimensions
Width: 470 mm
Depth: 650 mm
Height: 410 mm
Protection class
Device: IP 42
Operating panel: IP 20
Control cabinet: IP 54
Temperature test parameters for single-chamber operation |
Test chamber dimensions
Width: 470 mm
Depth: 650 mm
Height: 410 mm
Protection class ...Temperatur Temperature range
Hot chamber: +50°C to +220°C
Cold chamber: -70°C to +70°C
Temperature deviation over time: ±2 K
in steady state
Temperature deviation over space: ±2 K
in steady state in the car
Heating rate, hot chamber: 11 K/min
Cooling rate, cold chamber: K/min
Heating rate, cold chamber: 2 K/min
Cooling rate, hot chamber: K/min
Observation window: 355 x 355 mm
Pipe opening: 67 mm
Year of manufacture: 2000
Operating hours: 104,382
Weight: 1000 kg
Further items – new and used – can be found in our shop! International shipping costs on request!
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2008
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 2862 ... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
छोटा विज्ञापन
Borken
7,009 km
शॉक परीक्षण कक्ष –80 °C से +220 °C
VötschVT 7012 S2
VötschVT 7012 S2
छोटा विज्ञापन
Borken
7,009 km
शॉक परीक्षण कक्ष -80°C से +220°C
VötschVT 7012 S2
VötschVT 7012 S2
छोटा विज्ञापन
Borken
7,009 km
शॉक परीक्षण कक्ष +50 - 220°C -80 - +70°C
VötschVT 7012 S2 (6603)
VötschVT 7012 S2 (6603)
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है



























































