Zeiss Contura Vast XT Gold सीएमएमZeiss
CONTURA 9/18/8
Zeiss Contura Vast XT Gold सीएमएम
Zeiss
CONTURA 9/18/8
EXW स्थिर मूल्य कर के अतिरिक्त
€1,10,000
निर्माण वर्ष
2020
स्थिति
उपयोग किया हुआ
(पूरी तरह से कार्यरत)
स्थान
Budapest 

मूल आधारभूत जानकारी
- मशीन का नाम:
- Zeiss Contura Vast XT Gold सीएमएम
- निर्माता:
- Zeiss
- मॉडल:
- CONTURA 9/18/8
- निर्माण वर्ष:
- 2020
- स्थिति:
- बहुत अच्छा (इस्तेमाल किया हुआ)
- कार्यक्षमता:
- पूरी तरह से कार्यरत
- प्रचालन घंटे:
- 12,500 h
मूल्य और स्थान
EXW स्थिर मूल्य कर के अतिरिक्त
€1,10,000
- स्थान:
- Budapest, हंगरी

कॉल करें
तकनीकी विवरण
शक्ति विवरण
इनपुट वोल्टेज:
230 V
प्रलेखन और प्रमाणन
अंतिम ओवरहाल का वर्ष:
2025
प्रलेखन / मैन्युअल
अक्ष विनिर्देश
X-अक्ष यात्रा दूरी:
900 मिमी
Y-अक्ष की यात्रा दूरी:
1,800 मिमी
Z-अक्ष की यात्रा दूरी:
800 मिमी
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A22566042
- अद्यतन:
- अंतिम बार 17.08.2026 को
विवरण
We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
Dwodpfxozuzf Io Ahuoc
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
Dwodpfxozuzf Io Ahuoc
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2023
1 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+36 20 41... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Schwäbisch Gmünd
6,799 km
वायर इरोडिंग मशीन
SodickAQ537L, AQ 327L und AG 60L
SodickAQ537L, AQ 327L und AG 60L
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Baarle-Nassau
7,144 km
भंडारण लिफ्ट
KardexShuttle XP500
KardexShuttle XP500
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Schijndel
7,107 km
ऊर्ध्वाधर मशीनिंग केंद्र
HERMLEC 400 U
HERMLEC 400 U
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Sonsbeck
7,044 km
डीआईएन 7500 के अनुसार सार्वभौमिक तनन परीक्षण मशीन
Hegewald & PeschkeH5TMNI
Hegewald & PeschkeH5TMNI
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Mögglingen
6,784 km
ऊर्ध्वाधर मशीनिंग केंद्र
HURCOVMX 42 i
HURCOVMX 42 i
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Halberstadt
6,724 km
सीएनसी टर्निंग और मिलिंग सेंटर - 5-अक्ष
DMGDMC 210 FD
DMGDMC 210 FD
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
जर्मनी
6,946 km
Hurco VMX 42i
HurcoVMX 42i
HurcoVMX 42i
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Sonnenbühl
6,844 km
उपकरण मापने की मशीन
ZollerTitan
ZollerTitan
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Contamine-sur-Arve
7,060 km
ऊर्ध्वाधर मशीनिंग केंद्र
HURCOVMX30 UHSI
HURCOVMX30 UHSI
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Olching
6,681 km
बेलनाकार पीसने की मशीन
EMAGWPG 7
EMAGWPG 7
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है






















































































