भारी शुल्क शेल्फ4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
भारी शुल्क शेल्फ
4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
VB कर के अतिरिक्त
€1,490
निर्माण वर्ष
2024
स्थिति
प्रदर्शनी मशीन
स्थान
Bad Feilnbach 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
मूल्य और स्थान
VB कर के अतिरिक्त
€1,490
- स्थान:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A5776089
- अद्यतन:
- अंतिम बार 28.01.2025 को
विवरण
Cantilever rack in painted version (RAL 7016 anthracite):
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
Rjdpfsguk A Hsx Aatjr
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
Rjdpfsguk A Hsx Aatjr
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 8064 ... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
छोटा विज्ञापन
जर्मनी
6,848 km
प्लेट भंडारण के साथ सीएनसी मशीनिंग केंद्र
Holz-HerDynestic 7532 10.5 automatic mit Store-Master 511
Holz-HerDynestic 7532 10.5 automatic mit Store-Master 511
छोटा विज्ञापन
Sierakowska Huta
6,304 km
चिपर लकड़ी काटने वाला यंत्र
KOHLBACH THW-30/30
KOHLBACH THW-30/30
छोटा विज्ञापन
Bad Feilnbach
6,631 km
ब्रैकट रैक
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
छोटा विज्ञापन
Grünkraut
6,805 km
ड्रम चिपर/लकड़ी श्रेडर
S&F GmbHATH 300
S&F GmbHATH 300
छोटा विज्ञापन
Stary Dwór
6,282 km
प्याज छीलने की मशीन
ProdMaCB-80
ProdMaCB-80
छोटा विज्ञापन
Sindelfingen
6,855 km
भंडारण लिफ्ट
KardexShuttle XP-500-2450-813
KardexShuttle XP-500-2450-813
छोटा विज्ञापन
Radeberg
6,520 km
स्टेनलेस स्टील केन्द्रापसारक पंप स्टेनलेस स्टील पंप
KSBCPK-CM 250-315 / CPKN-C1 250-315
KSBCPK-CM 250-315 / CPKN-C1 250-315
छोटा विज्ञापन
Helmstedt
6,730 km
क्रेन के लिए इस्पात निर्माण
no nameStahlkonstruktion fuer Krananlage
no nameStahlkonstruktion fuer Krananlage
छोटा विज्ञापन
Sigulda
5,969 km
सेंट्रीफ्यूज स्पिन ड्रायर
Alistar EuropeVSD500
Alistar EuropeVSD500
छोटा विज्ञापन
Domaszék
6,010 km
सेंसर के साथ एमकेटी 100 रोलेबल कलेक्शन ट्रे
Maurer GépMKT 100
Maurer GépMKT 100
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है























































































