टिपर सेमिट्रेलरBENALU
DA 24/EL 970 50m³
टिपर सेमिट्रेलर
BENALU
DA 24/EL 970 50m³
स्थिर मूल्य कर के अतिरिक्त
€16,870
स्थिति
उपयोग किया हुआ
स्थान
Korschenbroich-Glehn 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
मूल्य और स्थान
स्थिर मूल्य कर के अतिरिक्त
€16,870
- विक्रेता का स्थान:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, जर्मनी
कॉल करें
मशीन बिक्री

क्या आपने अपनी प्रयुक्त मशीन पहले ही विज्ञापित कर दी है?
Machineseeker के माध्यम से बिना कमीशन के बेचें।
मशीनों की बिक्री के बारे में और जानकारी
मशीनों की बिक्री के बारे में और जानकारी
तकनीकी विवरण
- धुरा विन्यास:
- 3 धुरे
- लोडिंग स्पेस की लंबाई:
- 9,700 मिमी
- लोडिंग स्पेस की चौड़ाई:
- 2,350 मिमी
- लोडिंग स्पेस की ऊँचाई:
- 2,200 मिमी
- लोडिंग स्पेस वॉल्यूम:
- 50 मी³
- प्रथम पंजीकरण:
- 02/2009
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A20066010
- संदर्भ संख्या:
- 2430
- अद्यतन:
- अंतिम बार 25.09.2025 को
विवरण
Chassis
ALU Frame
Two fully automatically welded T-profiles (width 200 mm), maximum stability with a mounted tipping shaft on the rear cross-member, chassis width approx. 1,200 mm.
Axles and Suspension, Disc Brake
BPW axle assemblies, 3 x 9 tons with air suspension, lift and lower valve, 1st axle automatically liftable, load gauge.
Tyres and Wheels
6 wheels fitted with tyres size 385/65 R 22.5, approximately 50% tread remaining, on silver aluminium rims, 11.75×22.5 ET 0.
Landing Legs
Mechanical landing gear, 2x 20 t support load with swiveling foot.
Braking System
According to EU regulations, dual-circuit system as per EEG, spring-loaded parking brake acting on two axles, ABS system.
Electrical System
Compliant with German StVZO regulations with 2 five-chamber taillights (Aspöck type), 24-volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with lateral LED outline markers, 2 marker lamps, 2 separate LED reversing lights.
Tipping Body/Bin
Aluminium bin, sides with welded vertical aluminium profiles, floor approx. 6 mm aluminium, front wall in straight design, 4 mm with reinforcement profiles for the tipper cylinders, side walls 3 mm with external mounted U-reinforcement profiles, straight type double-wing rear door, combo door design (pendulum and door) in 1/2–1/2 layout with two grain chutes with water guard, frame extension at the grain chute for a grain sack.
Hydraulic System
Hydraulic cylinder mounted at the front wall with an operating pressure of approx. 150 bar, brand: Edbro, incl. approx. 2.5 m hydraulic hose and loose 1" half-coupling.
Dcjdpfoxfn A Iex Aa Ren
Accessories
6 plastic mudguards with 2 mud flaps, 3 m aluminium ladder, foldable underrun protection, lateral side protection, walkway at front wall with access ladder on left and right, 3 fixed bows, rolling tarpaulin with a central aluminium tube, rolling tarpaulin system, tarpaulin quality approx. 660 g/m², side tarpaulin closure with tensioning straps operable from the walkway, 2 wheel chocks, toolbox type 600, without spare wheel holder, etc.
Offer and images subject to change.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
ALU Frame
Two fully automatically welded T-profiles (width 200 mm), maximum stability with a mounted tipping shaft on the rear cross-member, chassis width approx. 1,200 mm.
Axles and Suspension, Disc Brake
BPW axle assemblies, 3 x 9 tons with air suspension, lift and lower valve, 1st axle automatically liftable, load gauge.
Tyres and Wheels
6 wheels fitted with tyres size 385/65 R 22.5, approximately 50% tread remaining, on silver aluminium rims, 11.75×22.5 ET 0.
Landing Legs
Mechanical landing gear, 2x 20 t support load with swiveling foot.
Braking System
According to EU regulations, dual-circuit system as per EEG, spring-loaded parking brake acting on two axles, ABS system.
Electrical System
Compliant with German StVZO regulations with 2 five-chamber taillights (Aspöck type), 24-volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with lateral LED outline markers, 2 marker lamps, 2 separate LED reversing lights.
Tipping Body/Bin
Aluminium bin, sides with welded vertical aluminium profiles, floor approx. 6 mm aluminium, front wall in straight design, 4 mm with reinforcement profiles for the tipper cylinders, side walls 3 mm with external mounted U-reinforcement profiles, straight type double-wing rear door, combo door design (pendulum and door) in 1/2–1/2 layout with two grain chutes with water guard, frame extension at the grain chute for a grain sack.
Hydraulic System
Hydraulic cylinder mounted at the front wall with an operating pressure of approx. 150 bar, brand: Edbro, incl. approx. 2.5 m hydraulic hose and loose 1" half-coupling.
Dcjdpfoxfn A Iex Aa Ren
Accessories
6 plastic mudguards with 2 mud flaps, 3 m aluminium ladder, foldable underrun protection, lateral side protection, walkway at front wall with access ladder on left and right, 3 fixed bows, rolling tarpaulin with a central aluminium tube, rolling tarpaulin system, tarpaulin quality approx. 660 g/m², side tarpaulin closure with tensioning straps operable from the walkway, 2 wheel chocks, toolbox type 600, without spare wheel holder, etc.
Offer and images subject to change.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2002
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 2182 ... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है