DMG NHX5000DMG
NHX5000
DMG NHX5000
DMG
NHX5000
निर्माण वर्ष
2023
स्थिति
उपयोग किया हुआ
स्थान
ऑस्ट्रिया 

मूल आधारभूत जानकारी
- मशीन का नाम:
- DMG NHX5000
- निर्माता:
- DMG
- मॉडल:
- NHX5000
- निर्माण वर्ष:
- 2023
- स्थिति:
- उपयोग के लिए तैयार (इस्तेमाल किया हुआ)
- प्रचालन घंटे:
- 1,612 h
मूल्य और स्थान
- स्थान:
- , ऑस्ट्रिया

कॉल करें
तकनीकी विवरण
आकार और वजन
कुल वजन:
12,000 किग्रा
स्पिंडल्स
स्पिंडल मोटर शक्ति:
37,000 डब्ल्यू
अधिकतम धुरी गति:
20,000 आरपीएम
अक्ष विनिर्देश
X-अक्ष यात्रा दूरी:
730 मिमी
Y-अक्ष की यात्रा दूरी:
730 मिमी
Z-अक्ष की यात्रा दूरी:
880 मिमी
अधिक विवरण
नियंत्रक निर्माता:
FANUC
कंट्रोलर मॉडल:
F31iB with CELOS
धुरों की संख्या:
4
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A23352278
- संदर्भ संख्या:
- AT-MIL-DMG-2023-00001
- अद्यतन:
- अंतिम बार 18.11.2026 को
विवरण
This 4-axis DMG NHX5000 was manufactured in 2023. It features X, Y and Z travels of 730, 730 and 880 mm, a 20,000 rpm spindle, and a 60-tool magazine. The machine also includes a two-station automatic pallet changer with 500 x 500 mm pallets. Consider the opportunity to buy this DMG NHX5000 horizontal machining centre. Contact us for further details.
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Iodpfxj Aky T Ae Abvobd
- Total Power-On Time (Total Zeit): 6,393.1 h- Machining / Cutting Hours (Bearbeitung): 1,611.8 h- Ready Hours (Betriebsbereit): 827.3 h- Standby Hours: 3,954.2 h- Control System: Fanuc F31iB with CELOS (ERGOline Touch 21.5-inch multi-touchscreen, MAPPS system, CELOS version 006.055.009 | 48182)- Screen Display Language: English (MAPPS, NC, and PC screens)- Travel X / Y / Z: 730 / 730 / 880 mm- Rapid Traverse: 60 m/min- Acceleration: Up to 12 m/s²- Chip-to-Chip Time: 2.5 sec- Workpiece Clamping Surface (Pallet Size): 500 x 500 mm (2 pallets with tapped holes)- Pallet Changer: Automatic rotary APC with 2 stations- B-Axis Indexing: Full 4th-axis / arbitrary indexing B-axis (min. indexing angle 0.001°, direct drive DD motor, hydraulic disc brake clamping, max. speed 100 rpm)- Pallet Hydraulic Fixture Interface (Auto-Coupler): 2 hydraulic clamping circuits and 2 air check lines (max. pressure 7 MPa / 1,015 psi) with drainage circuit- Spindle: speedMASTER® high-speed motor spindle, max. 20,000 rpm- Spindle Power: 37 / 26 / 18.5 kW (50 / 34.7 / 24.7 HP) (15% ED / 30 min / continuous)- Spindle Torque: 221 / 107 / 86.8 Nm (10% ED / 15 min / continuous)- Spindle Taper: HSK-A63 (Option J-019116 overriding standard BT40)- Tool Magazine Capacity: 60 tools (Ring magazine, random sorting; Option J-019095 overriding standard 40 tools)- Magazine-Side Operation Panel: 7-inch touch panel (J-009825)- Max. Tool Diameter: 70 mm (with adjacent tools) / 170 mm (without adjacent tools)- Max. Tool Length: 550 mm- Max. Tool Weight: 12 kg- Max. Tool Moment: 7.84 Nm- Coolant Type: Water-soluble coolant specification- Coolant Tank Capacity: 800 L (tank depth 400 mm)- Chip Conveyor: External chip conveyor, rear discharge, with drum filter (discharge height 1,090 mm)- Through-Spindle Coolant (CTS): Prepared for central coolant supply / interface for 8-stage high-pressure CTS (max. 7 MPa) + coolant/air through-spindle switching function (3/8" air connection)- Band Filter & High-Pressure Unit: TMF300 band filter system (600 L tank, IFM LK1022/LK1023 level sensor, high-pressure pump 0.1–7 MPa / 1–70 bar at 32 L/min, low-pressure pump 0.5 MPa / 5 bar at 100 L/min, lift pump 0.9 bar at 240 L/min)- Coolant Chiller: Without coolant chiller (J-014459)- Oil Mist Collector Interface: Suction port Ø 200 mm + electrical parts for AFS 1600- Measuring & Monitoring: Renishaw OMP60 optical spindle probe + workpiece setter; internal Renishaw table touch sensor for tool length/diameter measurement and breakage detection; tool breakage control system in magazine; MPC (Machine Protection Control) vibration sensor system on milling spindle- Automation & Interfaces: 4-color LED signal tower (Red, Yellow, Green, Blue), EtherNet/IP interface, 10 external M-codes (relay contact AC 250 V, max.
Iodpfxj Aky T Ae Abvobd
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Düsseldorf
7,012 km
क्षैतिज मशीनिंग केंद्र
DMG MORINHX 5000
DMG MORINHX 5000
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Monheim am Rhein
7,007 km
सीएनसी क्षैतिज मशीनिंग केंद्र
DMG MORINHX 5000
DMG MORINHX 5000
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
ऑस्ट्रिया
6,946 km
DMG MORI NHX 5000
DMG MORINHX 5000
DMG MORINHX 5000
सफल
आपका संदेश भेज दिया गया है।
नीलामी
नीलामी समाप्त हुई
Bayern
6,700 km
क्षैतिज मशीनिंग केंद्र
DMGNHX 5000
DMGNHX 5000
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है











































































