लो लोडर सेमिक्ट्रेलरFliegl
SDS 390, Nachlauflenkung, 2x VORHANDEN!
लो लोडर सेमिक्ट्रेलर
Fliegl
SDS 390, Nachlauflenkung, 2x VORHANDEN!
स्थिर मूल्य कर के अतिरिक्त
€24,900
स्थिति
उपयोग किया हुआ
स्थान
Bovenden 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
मूल्य और स्थान
स्थिर मूल्य कर के अतिरिक्त
€24,900
- विक्रेता का स्थान:
- Alte Bundesstraße 48, 37120 Bovenden, जर्मनी

कॉल करें
तकनीकी विवरण
- खाली वजन:
- 6,990 किग्रा
- अधिकतम भार वजन:
- 28,010 किग्रा
- कुल वजन:
- 35,000 किग्रा
- धुरा विन्यास:
- 3 धुरे
- प्रथम पंजीकरण:
- 01/2021
- अगला निरीक्षण (TÜV):
- 12/2026
- लोडिंग स्पेस की लंबाई:
- 10,000 मिमी
- लोडिंग स्पेस की चौड़ाई:
- 2,500 मिमी
- लोडिंग स्पेस की ऊँचाई:
- 1 मिमी
- सस्पेंशन:
- हवा
- टायर का आकार:
- 235/75R17.5
- रंग:
- सफ़ेद
- कुल चलित दूरी:
- 1,001 कि.मी.
- गियरिंग प्रकार:
- अन्य
- चालक केबिन:
- अन्य
- उपकरण:
- एबीएस
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A20750407
- संदर्भ संख्या:
- 89056
- अद्यतन:
- अंतिम बार 09.03.2026 को
विवरण
Vehicle location: Bovenden. 3 axles, air suspension, rear axle steered, ABS (anti-lock braking system), lashing eyes, underrun protection, support legs, storage box.
Body: 2 units available!
Overall length approx.: 13,800 mm
Maximum overall width: 2,550 mm
Overall height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Low-bed length approx.: 9,600 mm
Loaded bed height in low-bed approx.: 900 mm
Internal width approx.: 2,480 mm
Fifth wheel height approx.: 1,150 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm
High-strength fine-grain steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, slightly inclined outer frame with 'Load-Lock profile' for attaching lashing straps, 8 pairs of additional lashing eyes integrated into the outer frame, each rated to 5t.
1x plug-in balancing support (3-piece) on the low bed deck, top wooden cross support at least 200 mm wide for height compensation; gooseneck insertable in 3 positions with parking position at the kink. 4 pairs of stanchion pockets (83 x 83 mm) integrated into the floor for inserting the balancing support; compartment for removable stanchions open, located under the loading floor.
13 pairs of stanchion pockets (70 x 40 mm internal) recessed into the outer frame (3 pairs on gooseneck and 10 pairs on low-bed area); 3 rows of stanchion pockets in the floor, each with 7 pockets (70 x 40 mm internal); 26 removable stanchions (80 mm wide / 50 mm deep / 1,200 mm long), hot-dip galvanized. Hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area; steel/chequer plate floor. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to prior sale, errors and change!
Ffodpfx Aaex Hkcio Djw
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Body: 2 units available!
Overall length approx.: 13,800 mm
Maximum overall width: 2,550 mm
Overall height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Low-bed length approx.: 9,600 mm
Loaded bed height in low-bed approx.: 900 mm
Internal width approx.: 2,480 mm
Fifth wheel height approx.: 1,150 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm
High-strength fine-grain steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, slightly inclined outer frame with 'Load-Lock profile' for attaching lashing straps, 8 pairs of additional lashing eyes integrated into the outer frame, each rated to 5t.
1x plug-in balancing support (3-piece) on the low bed deck, top wooden cross support at least 200 mm wide for height compensation; gooseneck insertable in 3 positions with parking position at the kink. 4 pairs of stanchion pockets (83 x 83 mm) integrated into the floor for inserting the balancing support; compartment for removable stanchions open, located under the loading floor.
13 pairs of stanchion pockets (70 x 40 mm internal) recessed into the outer frame (3 pairs on gooseneck and 10 pairs on low-bed area); 3 rows of stanchion pockets in the floor, each with 7 pockets (70 x 40 mm internal); 26 removable stanchions (80 mm wide / 50 mm deep / 1,200 mm long), hot-dip galvanized. Hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area; steel/chequer plate floor. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to prior sale, errors and change!
Ffodpfx Aaex Hkcio Djw
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2002
2,313 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 551 8... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है


























