फ्लैटबेड और तिरपाल के साथ अर्ध-ट्रेलरFLIEGL
SDS 390 Gardine Standard Ultralight Coil
फ्लैटबेड और तिरपाल के साथ अर्ध-ट्रेलर
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW स्थिर मूल्य कर के अतिरिक्त
€25,990
निर्माण वर्ष
2021
स्थिति
उपयोग किया हुआ
स्थान
Triptis 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- फ्लैटबेड और तिरपाल के साथ अर्ध-ट्रेलर
- निर्माता:
- FLIEGL
- मशीन नंबर:
- WFDFLT33902029406
- निर्माण वर्ष:
- 2021
- स्थिति:
- लगभग नया (उपयोग किया हुआ)
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
EXW स्थिर मूल्य कर के अतिरिक्त
€25,990
- स्थान:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE
कॉल करें
तकनीकी विवरण
- कुल वजन:
- 35,000 किग्रा
- खाली वजन:
- 5,800 किग्रा
- अधिकतम भार वजन:
- 29,200 किग्रा
- धुरा विन्यास:
- 3 धुरे
- लोडिंग स्पेस की लंबाई:
- 13,650 मिमी
- लोडिंग स्पेस की चौड़ाई:
- 2,480 मिमी
- लोडिंग स्पेस की ऊँचाई:
- 2,790 मिमी
- प्रथम पंजीकरण:
- 12/2021
- सस्पेंशन:
- एयर-लिफ्ट
- रंग:
- चांदी
- टायर का आकार:
- 385/65 R22.5"
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A19083991
- संदर्भ संख्या:
- 59340
- अद्यतन:
- अंतिम बार 06.05.2025 को
विवरण
The images are archived; the vehicle may still be in use!
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
Dedpfx Aswhp A Doa Rscn
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
Dedpfx Aswhp A Doa Rscn
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2006
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 36482... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है