फ्लैटबेड / तिरपालFliegl
SDS 390 RoadRunner
फ्लैटबेड / तिरपाल
Fliegl
SDS 390 RoadRunner
EXW स्थिर मूल्य कर के अतिरिक्त
€9,900
निर्माण वर्ष
2015
स्थिति
उपयोग किया हुआ
स्थान
Triptis 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- फ्लैटबेड / तिरपाल
- निर्माता:
- Fliegl
- मॉडल:
- SDS 390 RoadRunner
- मशीन नंबर:
- WFDFLT33902017848
- निर्माण वर्ष:
- 2015
- स्थिति:
- उपयोग किया हुआ
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
EXW स्थिर मूल्य कर के अतिरिक्त
€9,900
- स्थान:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

कॉल करें
तकनीकी विवरण
- खाली वजन:
- 6,537 किग्रा
- अधिकतम भार वजन:
- 28,463 किग्रा
- कुल वजन:
- 35,000 किग्रा
- धुरा विन्यास:
- 3 धुरे
- प्रथम पंजीकरण:
- 10/2015
- लोडिंग स्पेस की लंबाई:
- 13,650 मिमी
- लोडिंग स्पेस की चौड़ाई:
- 2,480 मिमी
- लोडिंग स्पेस की ऊँचाई:
- 2,790 मिमी
- टायर का आकार:
- 385/65 r22.5
- रंग:
- चांदी
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A9058631
- संदर्भ संख्या:
- 37357
- अद्यतन:
- अंतिम बार 06.05.2025 को
विवरण
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Ffjdokyrmiepfx Abpet
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Ffjdokyrmiepfx Abpet
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 36482... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है










