समीट्रेलर

Wiese Baustoffauflieger - Heckkran Kran Fassi

Wiese Building Materials Semi-Trailer

Weights:
- Fifth-wheel load: 12,000 kg
- Axle load: 27,000 kg
- Permissible total weight: 39,000 kg
- Unladen weight: 10,840 kg

Dimensions:
Length
- Loading area length: approx. 9,200 mm
- Overall length: approx. 10,600 mm

Width
- Internal width: 2,480 mm
- Overall width: 2,550 mm

Kingpin
- 1 position with 2" kingpin

Coupling height
- In horizontal position: approx. 1,160 mm
- Top edge of main beam (without floor): approx. 1,380 mm

Loading height:
- approx. 1,410 mm

Lashing points on outer frame, D=30 mm, with hole strip on the slope (160mm high / 30mm floor lowering / 4mm wall thickness)
Main beam distance
- 980 mm (center to center) – 1,130 mm (outer to outer)

Axles
- 3 axles, each rated at 9,000 kg
- Manufacturer: SAF, with disc brakes D=430 mm
- Track width: 2,040 mm
- ABS: 1 axle with sensor
- Axle spacing: approx. 1,510 mm / approx. 1,510 mm

Suspension
- Original SAF air suspension with lift/lower valve, with catch cables

Axle lift
- First axle lift, automatic load-dependent starting aid, switchable by button in the cab

Steering
- Mechanical forced steering on axles 2 and 3 (two-rod steering system by Tridec)

Braking system
- 2-line Wabco pneumatic braking system according to EU Directive 71/320/EEC ff. with:
- EBS/ABS 2S/2M with Roll Stability Support (RSS) and 7-pin socket
- 1x ISO coupling head yellow
- 1x ISO coupling head red
- Spring-type parking brake on 2 axles
- All mounted with quick couplings
- Aluminium air tanks

Air system
- Compressed air installation with:
- 1x lift/lower valve
- 1x level control valve
- Aluminium air tanks
- All mounted with quick couplings
- Automatic lowering of air suspension during crane operation

Tyres
- 6 units, type: 385/65 R22.5"
- Manufacturer: as per manufacturer’s choice
- Tyre pressure monitoring system on all 6 tyres with in-cab display

Rims
- 6x steel rims 11.75x22.5", 10-hole, hub-centered, offset: 120 mm

Support device
- Mechanical landing legs with T-pendulum foot, permissible lift capacity: 2x 12,000 kg
- Operable from one side, 2 speeds
- Manufacturer: as per manufacturer’s choice

Wheel covers & splash guards
- 6x plastic semi-shell wheel covers
- Mudguard mounting reinforced with band steel
- Note: Mudguard on steering axle 3 with cut-out on the inside

Lighting system
- 24V lighting system according to EU Directive 76/756/EEC ff., including:
- 2x multi-chamber tail lights
- Lane marker lights
Dwsdpfsw Tgcwox Ahxjc
- Number plate illumination
- LED side marker lights with indicator function
- 2x 7-pin and 1x 15-pin sockets wired to EU standard
- Rear lights mounted in reinforced light carrier = approved underrun protection
- All required markings

Additional installations:
- Electrical connection for crane control pre-installed as per specification

Protective equipment
- Side underrun and rear underrun protection in aluminium according to EU guidelines

Floor
- OKULEN floor, 32 mm

Body structure
- Vertical front bulkhead, 1,200 mm high, fixed-welded, consisting of 4x steel profiles, welded to the front panel with aluminium hollow profile as infill
- Inside: 625 mm high wear plate, galvanized steel
- Both sides: Kinnegrip stanchions K20/1,100 mm high for unobstructed through-loading
- Vertical rear wall, 1,100 mm high, fixed-welded, consisting of 4x steel profiles, welded to the rear panel, aluminium hollow profile as infill
- Inside: 625 mm high wear plate, galvanized steel
- Both sides: Kinnegrip stanchions

इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।