पाउडर कोटिंग्स के लिए पीसने की प्रणालीNEUMAN & ESSER
ICM 19
पाउडर कोटिंग्स के लिए पीसने की प्रणाली
NEUMAN & ESSER
ICM 19
EXW स्थिर मूल्य कर के अतिरिक्त
€6,53,260
निर्माण वर्ष
2023
स्थिति
नई
स्थान
Sliven 

तस्वीरें दिखाती हैं
मानचित्र दिखाएँ
मशीन के बारे में जानकारी
- मशीन का नाम:
- पाउडर कोटिंग्स के लिए पीसने की प्रणाली
- निर्माता:
- NEUMAN & ESSER
- मॉडल:
- ICM 19
- निर्माण वर्ष:
- 2023
- स्थिति:
- नया
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
EXW स्थिर मूल्य कर के अतिरिक्त
€6,53,260
- स्थान:
- P94W+5F, Sliven, Bulgaria

कॉल करें
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A19836255
- अद्यतन:
- अंतिम बार 25.08.2025 को
विवरण
2x ICM19
Standard system designed for operation at ambient temperatures of 5 °C - 30 °C
Njdpew Snm Uefx Aa Rswp
GA-drawing according to NEA standard arrangement
P&ID No.
EX-Protection PSR 11 + ATEX protective systems
Power Supply 380 V ± 5% - 50 Hz
Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C.
(altitude of installation side < 500m a.s.l.)
Capacity Range
137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge
Nominal Capacity
319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation)
Details
for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³
Standard system designed for operation at ambient temperatures of 5 °C - 30 °C
Njdpew Snm Uefx Aa Rswp
GA-drawing according to NEA standard arrangement
P&ID No.
EX-Protection PSR 11 + ATEX protective systems
Power Supply 380 V ± 5% - 50 Hz
Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C.
(altitude of installation side < 500m a.s.l.)
Capacity Range
137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge
Nominal Capacity
319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation)
Details
for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2025
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+359 89 5... विज्ञापन
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है


























