Weiss WT-270/70/10 तापमान परीक्षण कक्ष 270L -70°C से +180°C

Weiss WT-270/70/10

Weiss

Temperature test chamber / climate test chamber
Weiss WT-270/70/10 temperature test chamber
Temperature test chamber, water-cooled, -70 °C to +180 °C

For sale is a used temperature test chamber
from the manufacturer Weiss Umwelttechnik GmbH.

The test chamber is suitable for temperature tests,
environmental simulation, material testing, quality assurance,
as well as development and stress tests.

Technical data

Manufacturer: Weiss Umwelttechnik GmbH
Type: WT-270/70/10
Device type: Temperature test chamber / climate test chamber
Test chamber volume: approx. 270 liters

Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H)
Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H)
Weight: approx. 835 kg

Temperature range: -70 °C to +180 °C
Temperature change rate heating: approx. 10 K/min
Temperature change rate cooling: approx. 14.5 K/min

Temperature deviation over time: ± 0.3 to ± 0.8 K
Temperature deviation spatially: ± 0.5 to ± 2 K

Refrigerant: R404A / R23
Refrigerant quantity R404A: 6.5 kg
Refrigerant quantity R23: 2.3 kg
Maximum suction pressure: 19 bar g
Maximum discharge pressure: 25 bar g
Standby pressure: 17 bar g

Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz
Rated power: 14 kW
Rated current: 26 A

Equipment

Touch panel operation
Viewing window in the door
Interior made of stainless steel
Test chamber lighting
Side openings
Shelf / test chamber equipment as shown in the pictures
Control cabinet
Main switch panel
Connector panel
Iedezgcqvspfx Afusih
RS232 interface
Documentation / operating manual
Accessories as shown in the pictures

Application areas

Temperature testing
Environmental simulation
Material testing
Electronics testing
Quality assurance
Research and development

Condition

Used
Optical condition as shown in the pictures

Scope of delivery

1x Weiss WT-270/70/10 temperature test chamber
Documentation / operating manual
Accessories as shown in the pictures

Important note:
For the safety of our customers, the following work will be carried out on the offered climate chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, refill with legally compliant refrigerant
3. Leak test with certificate
4. Documented test run after successful inspection

The table shown in the photos or other items not explicitly mentioned
are not part of the sale.

Shipping or freight forwarding possible.
Subject to changes, errors and prior sale.

We will gladly answer any further questions by telephone.

इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।