वर्किंग प्लेटफ़ॉर्म सेमीट्रेलरES-GE
3-Achs-Ballastauflieger
वर्किंग प्लेटफ़ॉर्म सेमीट्रेलर
ES-GE
3-Achs-Ballastauflieger
स्थिति
नई
स्थान
Essen 

मूल आधारभूत जानकारी
- मशीन का नाम:
- वर्किंग प्लेटफ़ॉर्म सेमीट्रेलर
- निर्माता:
- ES-GE
- मॉडल:
- 3-Achs-Ballastauflieger
- स्थिति:
- नया
मूल्य और स्थान
- विक्रेता का स्थान:
- Heegstraße 6-8, 45356 Essen, जर्मनी

कॉल करें
तकनीकी विवरण
आकार और वजन
कुल वजन:
45,000 किग्रा
अधिकतम भार वजन:
39,080 किग्रा
धुरे और पहिये
धुरा विन्यास:
3 धुरे
सुरक्षा विशेषताएँ
एबीएस
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A23366674
- संदर्भ संख्या:
- 36625
- अद्यतन:
- अंतिम बार 21.11.2026 को
विवरण
You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment list:
Complete equipment list available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers
* Designed for high point loads, outer frame as UNP profile, wear plate approx. 8 mm
* Underrun protection approx. 700 mm wide
Fifth Wheel Coupling
* 2-inch kingpin (also suitable for 3.5-inch)
Rear Underrun Protection
* According to EC, bolted design
Side Underrun Protection
* According to EC
Landing Gear
* 24 t landing gear with single-side operation (approx. 66 t test load)
* Jost Module CH (Heavy Duty) S-foot
Axles
* 3 x 9 t air suspension axle unit, manufacturer SAF, with disc brake approx. 430 x 45 mm, ABS
* Wheel connection center-mounted, 10-hole with offset 120
* Total stroke of the air suspension approx. 200 mm, of which lifting approx. 140 mm and lowering approx. 60 mm
* Control via rotary spool valve with detent function, with RTR function, switch for second driving height (+ approx. 50 mm)
* On the holder of the lifting and lowering system, Smartboard/TIM/Infocenter, without display, TPMS
Lift Axle
* First axle liftable, with fully automatic
* load-dependent lift control
* Starting aid via button in the cab (15-pole socket PIN12)
* Button in the cab is not included in the scope of delivery
Braking System
* Two-circuit compressed air braking system according to EC with EBS and RSS
* automatic load-dependent regulation
* Spring brake cylinders as parking brake
* Interchangeable coupling heads firmly mounted on the front crossmember
* Without connection line to the tractor unit, manufacturer Wabco
Tires
* 6-fold, 385/65 R22.5 160J on rim 11.75 X 22.5 (manufacturer of our choice)
* Offset 120, basic version tire pressure control system, connected to the CAN bus system of the EBS, tire pressure display in the cab (pre-equipment by the tractor unit manufacturer)
Fenders
* According to EC, PVC fenders (half shells) over all axles, splash guards with anti-spray
Load Securing
* 8 pairs of stake pockets welded into the outer frame (tensile force approx. 3 t)
* 6 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t)
* Stake pocket receptacles/stakes: 5 pairs of stake pocket receptacles embedded in the outer frame, approx. 90 x 90 x 4 mm
* 3 pairs of stake pocket receptacles embedded in the floor, approx. 90 x 90 x 4 mm
* 10 pcs. plug-in stakes made of galvanized square tube, approx. 80x80x4 mm, with stop at the bottom
Kedpfo Aldawox Adwond
Front Wall
* Front wall in bolted design, approx. 1,200 mm high, clad with sheet metal
Stake Rack
* Internal stake rack on the front wall
Floor
* Approx. 28 mm hardwood floor embedded in the outer frame, with galvanized omega steel profiles
Lighting
* According to EC, 24 Volt with multi-chamber lights
* LED side marker lights
* LED position lights, white in front
* LED outline lights in the rear
* License plate lights, 1x15-pole and 2x7-pole plug connection on the front crossmember
Equipment
* Warning sign according to ECE 70
* 2 pcs. LED work lights on the lamp carrier (switched via reverse gear)
* Holder for rotating beacon on the rear (including rotating beacon)
* 1 pc. folding and extendable access ladder on the rear (without platform)
* 2 pcs. stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall, Smart-Board with ax
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Excerpt from the equipment list:
Complete equipment list available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers
* Designed for high point loads, outer frame as UNP profile, wear plate approx. 8 mm
* Underrun protection approx. 700 mm wide
Fifth Wheel Coupling
* 2-inch kingpin (also suitable for 3.5-inch)
Rear Underrun Protection
* According to EC, bolted design
Side Underrun Protection
* According to EC
Landing Gear
* 24 t landing gear with single-side operation (approx. 66 t test load)
* Jost Module CH (Heavy Duty) S-foot
Axles
* 3 x 9 t air suspension axle unit, manufacturer SAF, with disc brake approx. 430 x 45 mm, ABS
* Wheel connection center-mounted, 10-hole with offset 120
* Total stroke of the air suspension approx. 200 mm, of which lifting approx. 140 mm and lowering approx. 60 mm
* Control via rotary spool valve with detent function, with RTR function, switch for second driving height (+ approx. 50 mm)
* On the holder of the lifting and lowering system, Smartboard/TIM/Infocenter, without display, TPMS
Lift Axle
* First axle liftable, with fully automatic
* load-dependent lift control
* Starting aid via button in the cab (15-pole socket PIN12)
* Button in the cab is not included in the scope of delivery
Braking System
* Two-circuit compressed air braking system according to EC with EBS and RSS
* automatic load-dependent regulation
* Spring brake cylinders as parking brake
* Interchangeable coupling heads firmly mounted on the front crossmember
* Without connection line to the tractor unit, manufacturer Wabco
Tires
* 6-fold, 385/65 R22.5 160J on rim 11.75 X 22.5 (manufacturer of our choice)
* Offset 120, basic version tire pressure control system, connected to the CAN bus system of the EBS, tire pressure display in the cab (pre-equipment by the tractor unit manufacturer)
Fenders
* According to EC, PVC fenders (half shells) over all axles, splash guards with anti-spray
Load Securing
* 8 pairs of stake pockets welded into the outer frame (tensile force approx. 3 t)
* 6 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t)
* Stake pocket receptacles/stakes: 5 pairs of stake pocket receptacles embedded in the outer frame, approx. 90 x 90 x 4 mm
* 3 pairs of stake pocket receptacles embedded in the floor, approx. 90 x 90 x 4 mm
* 10 pcs. plug-in stakes made of galvanized square tube, approx. 80x80x4 mm, with stop at the bottom
Kedpfo Aldawox Adwond
Front Wall
* Front wall in bolted design, approx. 1,200 mm high, clad with sheet metal
Stake Rack
* Internal stake rack on the front wall
Floor
* Approx. 28 mm hardwood floor embedded in the outer frame, with galvanized omega steel profiles
Lighting
* According to EC, 24 Volt with multi-chamber lights
* LED side marker lights
* LED position lights, white in front
* LED outline lights in the rear
* License plate lights, 1x15-pole and 2x7-pole plug connection on the front crossmember
Equipment
* Warning sign according to ECE 70
* 2 pcs. LED work lights on the lamp carrier (switched via reverse gear)
* Holder for rotating beacon on the rear (including rotating beacon)
* 1 pc. folding and extendable access ladder on the rear (without platform)
* 2 pcs. stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall, Smart-Board with ax
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2003
68 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 201 8... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
सफल
आपका संदेश भेज दिया गया है।
छोटा विज्ञापन
Essen
7,003 km
वर्किंग प्लेटफ़ॉर्म सेमीट्रेलर
ES-GE3-Achs-Ballastauflieger
ES-GE3-Achs-Ballastauflieger
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है
































