पूर्ण आरा मिल (स्थिर)ALMAB
5000/4000
पूर्ण आरा मिल (स्थिर)
ALMAB
5000/4000
निर्माण वर्ष
2002
स्थिति
उपयोग किया हुआ
(पूरी तरह से कार्यरत)
स्थान
Schwäbisch Gmünd 

मशीन के बारे में जानकारी
- मशीन का नाम:
- पूर्ण आरा मिल (स्थिर)
- निर्माता:
- ALMAB
- मॉडल:
- 5000/4000
- मशीन नंबर:
- 001
- निर्माण वर्ष:
- 2002
- स्थिति:
- उपयोग किया हुआ
- कार्यक्षमता:
- पूरी तरह से कार्यरत
मूल्य और स्थान
- स्थान:
- Egental 8, 73529 Schwäbisch Gmünd, Deutschland

कॉल करें
तकनीकी विवरण
- काटने की लंबाई (अधिकतम):
- 5,000 मिमी
प्रस्ताव का विवरण
- विज्ञापन आईडी:
- A22009028
- संदर्भ संख्या:
- Trimmer und Stapelanlagen
- अद्यतन:
- अंतिम बार 29.07.2026 को
विवरण
Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats:
Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
- Cross-transfer of boards with a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle
- Alignment roller conveyor
- Chain cross conveyor as a layer former
- Star turners and sorters before the trimmer
- Edge detection (ALFHA edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates:
without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1
with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2
with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut - cut length 505 mm for the underlying vibration trough
- 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm
- Automatic lowering of finished packages and transfer to automatic strapping
- FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor
- ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
Bedpfxjy Uzhfj Agtewt
For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours.
The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems.
We can provide a process video via WhatsApp!
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
- Cross-transfer of boards with a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle
- Alignment roller conveyor
- Chain cross conveyor as a layer former
- Star turners and sorters before the trimmer
- Edge detection (ALFHA edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates:
without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1
with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2
with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut - cut length 505 mm for the underlying vibration trough
- 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm
- Automatic lowering of finished packages and transfer to automatic strapping
- FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor
- ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
Bedpfxjy Uzhfj Agtewt
For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours.
The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems.
We can provide a process video via WhatsApp!
इस विज्ञापन का स्वचालित रूप से अनुवाद किया गया है। अनुवाद में त्रुटियाँ संभव हैं।
आपूर्तिकर्ता
सूचना: निःशुल्क पंजीकरण करें या लॉगिन करें, सभी जानकारी प्राप्त करने के लिए।
से पंजीकृत: 2014
3 ऑनलाइन विज्ञापन
अनुरोध भेजें
टेलीफ़ोन & फैक्स
+49 7332 ... विज्ञापन
हो सकता है ये विज्ञापन भी आपकी रुचि के हों।
छोटा विज्ञापन
Schwäbisch Gmünd
6,791 km
ट्रिमर सहित स्टैकिंग प्रणाली
ALMAB-Stapelanlage5000 / 4000
ALMAB-Stapelanlage5000 / 4000
छोटा विज्ञापन
Malé Výkleky
6,392 km
लकड़ी टुकड़े करने वाला यंत्र
SG strojírny500
SG strojírny500
छोटा विज्ञापन
इटली
6,576 km
कंसोल टेबल के साथ मशीनिंग केंद्र
BIESSEROVER C 6.40
BIESSEROVER C 6.40
छोटा विज्ञापन
Miechucino
6,298 km
मशीनीकरण के साथ दो-शाफ्ट मल्टी-आरा
SocolestDAS 200
SocolestDAS 200
छोटा विज्ञापन
Jüri
6,051 km
चिपर हेड्स के साथ आरा मशीन
Veisto OYHewSaw R200
Veisto OYHewSaw R200
छोटा विज्ञापन
Grünau im Almtal
6,484 km
छाल उतारने की मशीन
BalzBG90
BalzBG90
छोटा विज्ञापन
Nattheim
6,764 km
उंगली के जोड़ की रेखा
छोटा विज्ञापन
Velké Karlovice
6,185 km
लॉग यार्ड मशीनरी
unknownML-35
unknownML-35
छोटा विज्ञापन
Cegléd
6,040 km
पूर्ण आरा मशीन
Costa Multiprisma
Costa Multiprisma
छोटा विज्ञापन
Jonava
5,927 km
बोर्ड स्टेकर
Brettstapler
Brettstapler
आपका विज्ञापन सफलतापूर्वक हटाया गया है
एक त्रुटि हुई है















































































































































